450cc install question
Ok, the O rings I need..I hvae a 93 d16 and putting the 450cc. Do I just need the Big bottom o rings or the WHOLE ring set, all three rings for each injector?
|
Re:450cc install question
do they already have the O-rings on top? or are yo talking about the seals?
|
Re:450cc install question
they already have the already have the two o rings on top, so I guess I just need the seals...right?
|
Re:450cc install question
If the injectors have all the factory seals on them still all you have to do is bore out your stock oem seals that go into the fuel rail.
steve |
Re:450cc install question
yeah that's what i was gonna say ;D but didn't know if he was asking about the O-rings or seals..
|
Re:450cc install question
So I can take them off the stock ones when I get them off and bore them out? it would save me $20 if so.
|
Re:450cc install question
Yes just bore out the stock seals. Don't go too crazy boring them out though. You don't want them too loose.
|
Re:450cc install question
cool that will save me money. just use a dremel eh?
|
Re:450cc install question
yup, just like all the writeups etc. say, a dremel tool and one of the sanding discs works perfectly for this task. Do it outside though... It gets pretty smokey ;)
|
Re:450cc install question
if your really ghetto you can just force the 450's into the original seals. they are rubber so they do stretch. theres no need to bore them out. :P
|
All times are GMT -5. The time now is 08:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands