450cc inj. install. (HELP)
 

im bout to put 450cc injectors on my 91 integra but its better to get some taller bottom seals right?? just tryin to find out if you guys got taller ones, and like what they came from or off of


PLEASE HELP YO

Re:450cc inj. install. (HELP)
 

You can use the factory Honda (Acura) seals, you just have to bore them out a bit to get them to fit snug around the bottom of the injector. If you don't want to use your factory seals, then go to NAPA and pick up an injector seal kit and use the green seal that is in the kit. I beieive you'll have to bore out the green seal also, but I have never used the kit, so I'm not sure. Do a search for injector seals, because I know there has been other posts about this, and they give pictures as well.

Re:450cc inj. install. (HELP)
 

i got the origional seals, so basicly what your sayin is that the seals in the kit r taller. i wouldent mind using my origional ones, it just seams like they got some room.

Re:450cc inj. install. (HELP)
 

Dremel/sand/bore/hone the stock ones.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:450cc inj. install. (HELP)
 

word! done deal! thanx