450cc black top injector install question
ok, I had the blue top 450cc, but they were off an 89 turbo gallant and I think they were worn out and one was stuck open, so my friend gave me a newer set of american black top 450cc and I can't get then into my fuel rail. if I take off the top O-ring, they will fit in, but I can't shove them in at all, they look about the same size as my orignials...
|
Re:450cc black top injector install question
My black tops slid in...took quite a bit of spit but i got that fucker on ;D
|
Re:450cc black top injector install question
Hahahaha.. that's a totally gross image. :P
|
Re:450cc black top injector install question
oh, you meant sliding it into the fuel rail...my bad :-X :P
|
Re:450cc black top injector install question
yeah, they fit into my manifold, but not the fuel rail, I don't get it!
|
Re:450cc black top injector install question
u cant drill the holes bigger or something?
or better yet use ur honda o-rings or the galant ones |
Re:450cc black top injector install question
what i did is got a new set of o-rings from honda for my car and it works fine...(i have the black tops too)
|
Re:450cc black top injector install question
Sounds like they are the wrong injectors. Whats the part number on the side?
|
Re:450cc black top injector install question
It's the O-rings that's the problem. I put the 450 o-rings on my stock one and THEY won't even fit in. I had the gallant ones and they fit fine, but the o-rings are all worn out, so I'll go buy some new ones. thanks for the help.
|
Re:450cc black top injector install question
use the honda orings they are a tad smaller, Be sure to use a little bit of grease, lube or anything on the rings so they slide into place.
|
All times are GMT -5. The time now is 01:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands