390 cc injectors from a dsm into a 5th gen
 

what do i need for these to work, im not srue if they are peak and hold or saturated and i dont know how to tell, can someone fill me in on what i need, i can post pics if necessary

Re:390 cc injectors from a dsm into a 5th gen
 

dsm injectors are peak and hold and require the use of a resistorbox in hondas.

Re:390 cc injectors from a dsm into a 5th gen
 

You need a resistor box, or inline resistors(10watt, 10ohm). You also need to dremel the little clip on the inside of the injector.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:390 cc injectors from a dsm into a 5th gen
 

you dremmel that?? jesus, a knife will do lol

Re:390 cc injectors from a dsm into a 5th gen
 

Hell yeah, like 5 seconds and I'm done. No cut fingers, no sliced veins. 8)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:390 cc injectors from a dsm into a 5th gen
 

my injector clips plugged right into the dsm injectors. i just had to dremel out the little black seals in the injectors seat things

Re:390 cc injectors from a dsm into a 5th gen
 

That's because you're OBD0 and you already have a resistor box. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:390 cc injectors from a dsm into a 5th gen
 

Ive got a 5th gen too and was going to go with 390's, should I abandon ship and go 450?

Re:390 cc injectors from a dsm into a 5th gen
 

bump....

Re:390 cc injectors from a dsm into a 5th gen
 

Im using 390s with my Fields v-sfc.It works fine.No problems at all.It runs a little rich but thats how i like it 8)