3 bar not work w/ uber? f-off!! 300hp b16 and 400hp ls/vtec b#tches!!
tuned two 3-bar map cars last week. warmup was a 9:1 b16 that netted 298whp (i'll post graph when i get back to the shop this week). just after that we strapped down a 9.5:1 ls/vtec that netted 404whp. owner of the car is going to add another step colder plug and tighten the gap slightly to fix the misfire. lsd is going in soon as well...torque steering on the dyno is a little uneasy feeling, but i can only imagine on the street.
http://members.aol.com/arsenic57/dyno2.jpg he went for a test ride and came back grinning from ear to ear. if someone says 3 bar doesn't work w/ uber...tell them to f-off!! |
Re: 3 bar not work w/ uber? f-off!! 300hp b16 and 400hp ls/vtec b#tches!!
Beautiful, hows the air fuel on the tune?
|
Re: 3 bar not work w/ uber? f-off!! 300hp b16 and 400hp ls/vtec b#tches!!
nice and pretty. 14 before turbo spools transitioning to low 13 at beginning of spool transitioning to high 11's. i was very surprised how smooth the tuning session went. he brought it to me right after the build to do 1hr of tuning just to get it driveable for break-in. i fully tuned it to 6psi that night in just over an hour netting 235 that night. this setup ranks up there w/ the smoother/quicker tunes w/o any issues...a real fun one.
this is the third time i've tuned his car: 1st time=tired old b16 2nd time=fresh rebuild on current motor 3rd time=current motor/current numbers he's already talking about adding/changing tuning for more boost and power. |
Re: 3 bar not work w/ uber? f-off!! 300hp b16 and 400hp ls/vtec b#tches!!
|
Re: 3 bar not work w/ uber? f-off!! 300hp b16 and 400hp ls/vtec b#tches!!
298 on a built b16, how much boost? was it a small turbo or something?
|
Re: 3 bar not work w/ uber? f-off!! 300hp b16 and 400hp ls/vtec b#tches!!
Originally Posted by projekteg
298 on a built b16, how much boost? was it a small turbo or something?
|
Re: 3 bar not work w/ uber? f-off!! 300hp b16 and 400hp ls/vtec b#tches!!
8.5:1 (think i mistakenly said 9:1) 15ish psi, stock sleeves...100 degree weather and sh#t ton of humidity. atl summers suck!!! cast manifold wasn't helping either.
ls/vtec has stock sleeves too. |
Re: 3 bar not work w/ uber? f-off!! 300hp b16 and 400hp ls/vtec b#tches!!
298whp @ 15psi seems slightly low to me.
My stock LS made 300whp @ 15psi. What turbo is this? What's your final timing like? |
Re: 3 bar not work w/ uber? f-off!! 300hp b16 and 400hp ls/vtec b#tches!!
Originally Posted by xenocron
298whp @ 15psi seems slightly low to me.
My stock LS made 300whp @ 15psi. What turbo is this? What's your final timing like? |
Re: 3 bar not work w/ uber? f-off!! 300hp b16 and 400hp ls/vtec b#tches!!
Originally Posted by turboDA6
its a 1.6 |
All times are GMT -5. The time now is 09:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands