Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

22re turbo

Old 11-03-2006, 10:21 PM
  #1  
1.5 BAR
Thread Starter
 
Join Date: Mar 2003
Posts: 1,134
Default 22re turbo

im in the process of turboing my pick up truck it has a 22re in it and i was wondering what i should use for managment. i cant decide on what to use, i really want to use hltech or micro tech but i also want to be as cheap as possible without sacraficing reliability. thanks
turboDXcoupe is offline  
Old 11-04-2006, 07:14 PM
  #3  
3.0 BAR
 
Join Date: Oct 2005
Location: St. Augustine FL
Posts: 3,938
Default Re: 22re turbo

+1 for megasquirt
Scott-EP is offline  
Old 11-05-2006, 10:47 AM
  #4  
1.0 BAR
 
Join Date: Apr 2006
Posts: 503
Default Re: 22re turbo

+2
DrSeuss is offline  
Old 11-05-2006, 10:37 PM
  #5  
1.5 BAR
 
Join Date: Sep 2004
Posts: 1,460
Default Re: 22re turbo

+3, but with ford EDIS for ignition. Im doing this project on a 7mgte supra as we speak. Cant believe how simple it is with the ford ignition.
sohcpwr is offline  
Old 11-07-2006, 03:27 PM
  #6  
1.0 BAR
 
Join Date: Sep 2006
Posts: 326
Default Re: 22re turbo

+4 for megasquirt. You need to be reasonably electronics savvy.
Megasquirt isn't simple, especially if you're building it yourself.

An FMU is a bit of a "hack" in my opinion - it's better than nothing but can only be properly tuned at one load point... Usually WOT.

There are other options - like FAST and SDS. They're both over $1500, you'll lose tach and AC function.

If you're not electronics savvy and can't solder, I sell "plug and play" megasquirt harnesses for the 22RE.
You can get a pre-configured megasquirt.. I can program for free. Literally you can put this system in and have it running in less than 10 minutes. You retain all stock functions. If you bought it all retail, cost is under $500.

EDIS is a better ignition system, but you'll lose the tach and you'll also lose the AC.. You'll have to add an additional ciricuit out of megasquirt to provide a correctly conditioned signal for those functions.





This was a photo of a test stage harness.



For turbo motors, there are various options on this harness. The main differences are if you're going to use the stock AFM or not use it.



dcg9381 is offline  
Old 11-08-2006, 04:23 PM
  #7  
0.0 BAR
 
Join Date: Oct 2005
Posts: 3
Default Re: 22re turbo

WOW!!! that is a nice set up you got there on the megasquirt...i pm'd you with a couple questions that i have for a certain application...
hachirokukid is offline  
Old 11-11-2006, 02:27 AM
  #8  
1.0 BAR
 
Join Date: Sep 2006
Posts: 326
Default Re: 22re turbo

Replied.. 22re only at this time.
dcg9381 is offline  
Old 11-12-2006, 04:09 PM
  #9  
1.0 BAR
 
Join Date: Sep 2006
Posts: 326
Default Re: 22re turbo

Photo of the harness used for the above engine.
It's +4 wires:
Ground
12v switched (to run a relay)
Intake air temp (I removed the AFM)
Wideband 02


dcg9381 is offline  
Old 11-30-2006, 11:45 AM
  #10  
3.0 BAR
 
Join Date: May 2005
Posts: 1,811
Default Re: 22re turbo

The stock ECU, wiring & sensors for a 22r-te... If you're running more boost, or a better turbo than that engine originally came with.
megasquirt FTW
Toysrme is offline  

Thread Tools
Search this Thread
Quick Reply: 22re turbo


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.