1.5 vtec turbo .bins (uberdata, chrome, ect)..
 

Okay I have tried alot of different bins for my car.

92 Canadian hatch, 1.5 D15B Vtec (Japan) P28 Ecu, 450cc DSM's, 14b Turbo (internal wastegate kept)...

None really work too well. (Noob tuner) So I ask if anyone has the same setup or a simaler setup to please post a link on this topic for me and others. The D15B is a jap only engine. Its pretty picky too. When I throw a 1.6 or 1.7 map it instantly throws a solid cell even before turning on the car. Oh it doesent matter if you have a .bin file in chrome or uberdata 1.*.....just specify it please. If you dont have a hosting site then just email it to me and I will host it on my site. Before you reply with something dumb.. Yes I checked pgmfi, xenocron, ect.

Gracias!

Re: 1.5 vtec turbo .bins (uberdata, chrome, ect)..
 

I have 1.5 edm vtec-e. I use 660ccm injectors, K03 turbo boosting around 11-13psi. I can send you my map. I tuned it with LC-1 wide band. It works great for me. Send me your email at bozo1234hr@yahoo.com and i will reply to you with atached bin. I tuned with CROME. I hope that is not a problem for you.

Re: 1.5 vtec turbo .bins (uberdata, chrome, ect)..
 

make your own.

if it throws a cel, its because there is a sensor enabled that is not present, or you are improperly burning chips, or your ecu is not properly chipped.

Re: 1.5 vtec turbo .bins (uberdata, chrome, ect)..
 

Yup. Check your solder job on the chip. Where in Canada are you? Make your own basemap.

Re: 1.5 vtec turbo .bins (uberdata, chrome, ect)..
 

i have the same setup pretty much. AMKrew on this site burnt me a conservative map. runs great, no CELs.

check him out

Re: 1.5 vtec turbo .bins (uberdata, chrome, ect)..
 

Thanks bro. I just messaged him. Yeah your setup is exactly like mine. I got to post some pics up when I get a chance.

Re: 1.5 vtec turbo .bins (uberdata, chrome, ect)..
 

i am going to guess that if you tried a lot of BINs and none worked...user error or there is a physical error in the car

no two setups run the same, but they generally run close

when you make BIN, make sure you disable the checksum and that you are enabling/disabling the proper sensors for the ECU you are using