02 sensor help
11-27-2008, 02:59 AM
#1
1.5 BAR
Thread Starter
Join Date: Feb 2007
Posts: 1,087
02 sensor help
Ive searched and found ---- other than the bosch has a way of keeping itself clean basicly i was messing with antilag and i keep frying o2 sensors i have the Uego. Is there somthing i can use to clean it every now and then it will read then it wont. I was told not to spray carb cleaner or anything else on it. Any ideas? ive wire brushed it.
11-28-2008, 07:25 PM
#2
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re: 02 sensor help
Mine come out clean, or lightly sooted. No cleaning needed. What do yours look like?
The drag car with the big laggy turbo that needs anti-lag ends up killing them due to exposure to racegas. I'm no help with that aspect.
If the gauge goes from full lean to reading AFRs like a lightswitch, you sure you don't have any leaks or the sensor too close to the exit that it's suffering from reversion?
The drag car with the big laggy turbo that needs anti-lag ends up killing them due to exposure to racegas. I'm no help with that aspect.
If the gauge goes from full lean to reading AFRs like a lightswitch, you sure you don't have any leaks or the sensor too close to the exit that it's suffering from reversion?
11-28-2008, 10:10 PM
#3
1.5 BAR
Thread Starter
Join Date: Feb 2007
Posts: 1,087
Re: 02 sensor help
the o2 is about 3 ft way from my turbo and mabey 11/2 feet from where the DP and exhaust meet. The sensor was fine for a bout a week then after testing antilag it ---- the bed. but that was for 2days its been working allright now. figures i did it a little today
Thread
Thread Starter
Forum
Replies
Last Post
ekturbohatch
Hybrid/Tech
0
08-30-2007 10:13 AM
