^^^Are My Injectors Bad?
 

Alright. I ran an FMU for a little while but a kinked vaccuum line led to a few broken ringlands.

anyways. i've been trying to get my SAFC II, 460cc injectors, and 2 bar MAP to work for a few weeks. With the stock injectors and fmu and stock map sensor the car runs great. With the SAFC II, 2 bar MAP and the 460cc's the car runs aweful. Undriveable. I know for a fact the SAFC is installed correctly. also the 2 bar. And both the products are brand new. Anyways the car idles like it has a bad o2 sensor when I input a negative correction on the SAFC. Im gettin about a 13.0 a/f ratio with 0 correction. This is pretty rich, but when i step on it a little in neutral, the car almost dies.

So i know the map sensor and the safc are installed perfect. and when i have the stock injectors in the fuel corrections work, but with the 460's, 2 bar map, the corrections seem to almost yeild no effect.

The only thing else left to be the problem seems to be the INjectors. im going to have them flow tested asap, but wanna know what u guys think. Sound like bad injectors to you?

Thanks.

Re: ^^^Are My Injectors Bad?
 

<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>

Re: ^^^Are My Injectors Bad?
 

what does that mean?

Re: ^^^Are My Injectors Bad?
 

why not use the stock map sensor?

Re: ^^^Are My Injectors Bad?
 

doesnt work. runs like 12 a/f at -%50. and same symptoms as the 2 bar. idles sparatically, and feels like the timing is off by like 30 degrees under acceleration. i know it would be advanced a lot, but i still get the same problem at 0 correction with the 2 bar. so i think it's gotta be the injectors. but on the other hand i cant see how injectors could go bad?