crx304

ok... so the accord is done, and i have spent more time than i wanted looking for a damn stock bin or a bin by someone else. (seriously..... 6 hrs+ searching)

the stats.....
92 accord 5 spd
p06 ecu
stock F22a
t25 turbo
450's
dsm mani
CCA FMIC


i need one that can run w/ uber 1.7 i have to get this car back to the owner, cause his other car is about to take a ----.

get me a .bin that is safe and makes the engine happy...... i'll paypal you $20

mike

warric_k

I can get you the stock bin no problem, but if you're asking me to find a program to open it, yank the fuel and ignition tables out, and throw it into a UD compatible bin, then I'll be crying.

TurboEF9

Link me to the bin.

Lets see if TE3.0 can handle it.

warric_k

I'll just throw them it up here. pgmfi.org has them if mine are corrupted or anything


n01 will open in chrome but show erroneous values. n50 gives an error outright about it being invalid.

http://www.pgmfi.org/twiki/pub/Libra...p39-n01-f6.rom
http://www.pgmfi.org/twiki/pub/Libra...p39-n50-89.bin

also, I just spent the last hour or so attempting to play with a p30 rom and the p39-n01 rom, using locations for the p39 from the p13, aaaaand it was almost ok, except for the fact that the scalars are completely different to the p30, and the p13 is definitely not a p39... but it did seem close.

crx304

or for that matter, a version of uberdata 1.6 would be very helpful, cause all the bins that i found are for V 1.6

if you have V 1.6, could you please email me the prog to : crx304@hotmail.com

the $20 reward still stands tho!

thanks again!!!
mike

BoosTedZSix

why dont u open it up a map for a p06 and change the displacement?

warric_k

timing will be different, and actual fuel curve will be different.

and do you need 1.6, or will 1.66 work?

crx304

let's try both since the f22 maps i found are so sparradic..... not sure what version they used to edit the map w/

thanks,
mike

prelude9384

Midnite racer X has a map, but it's made for a t3/t4. So it might not be that great for your little t25 you have.

crx304

yeah i tried to open his in 1.7...... but it was all fuxored!!!


still would love to have someone to link/send me 1.6, 1.66.........


mike