Parting out the turbo kit. Garrett Turbo, Tial Gate, Aeromotive fmu, etc....
#1
Parting out the turbo kit. Garrett Turbo, Tial Gate, Aeromotive fmu, etc....
Well my turbo kit did not sell one ebay...not even one bid. So Im parting the pieces out. Intercooler, and piping may be spoken for if not Ill post that up too.
Prices are firm and do not include shipping.
--------------------------------------------------------------------------------------------------
Hot side turbo pipes built for my 1996 dakota V8. This includes the passenger side header, crossover tube, and drivers side turbo log header. Everything to get the exhaust to the turbocharger is included. You will need new header bolts, and gaskets.
$600
************************************************** **********
New Garrett full 60-1 (aka T04S) Turbo w/P trim T4. This turbo has about about 2 miles of driving on it, and half hour of run time total. Garrett Stamps still visible. T04S .70 compressor housing with 4" inlet and 2.5" outlet. 1.00 A/R Turbine with P trim wheel. 4" V-band option
Im including the 4" stainless clamp, 4 AN inlet fitting, a 4 AN braided hose, and a 1/2 drain with a function7 drain flange.
$550
************************************************** ***************
New Tial 38mm Wastegate. 7psi spring. about 30 minutes of runtime. Ill include the dump pipe as well.
$190
************************************************** ****************
Carb Bonnet. Its a spectre hat. Prettty much brand new.
$70
************************************************** ****************
Greddy Catch can. Just the can not hoses. Pretty scratched and used.
$30
************************************************** ****************
New K&N filter as picture below. 4" inlet.
Sell for 30 or trade for K&N with 3" inlet. We both pay to ship.
************************************************** ******************
Aeromotive Digital FMU, Booster Pump, and fuel line with quick fit fuel rail fitting. I will also include the barbs to connect to the factory feed fuel line. Only about 500 miles on the FMU, and Pump. Fuel line is brand new.
$350
Prices are firm and do not include shipping.
--------------------------------------------------------------------------------------------------
Hot side turbo pipes built for my 1996 dakota V8. This includes the passenger side header, crossover tube, and drivers side turbo log header. Everything to get the exhaust to the turbocharger is included. You will need new header bolts, and gaskets.
$600
************************************************** **********
New Garrett full 60-1 (aka T04S) Turbo w/P trim T4. This turbo has about about 2 miles of driving on it, and half hour of run time total. Garrett Stamps still visible. T04S .70 compressor housing with 4" inlet and 2.5" outlet. 1.00 A/R Turbine with P trim wheel. 4" V-band option
Im including the 4" stainless clamp, 4 AN inlet fitting, a 4 AN braided hose, and a 1/2 drain with a function7 drain flange.
$550
************************************************** ***************
New Tial 38mm Wastegate. 7psi spring. about 30 minutes of runtime. Ill include the dump pipe as well.
$190
************************************************** ****************
Carb Bonnet. Its a spectre hat. Prettty much brand new.
$70
************************************************** ****************
Greddy Catch can. Just the can not hoses. Pretty scratched and used.
$30
************************************************** ****************
New K&N filter as picture below. 4" inlet.
Sell for 30 or trade for K&N with 3" inlet. We both pay to ship.
************************************************** ******************
Aeromotive Digital FMU, Booster Pump, and fuel line with quick fit fuel rail fitting. I will also include the barbs to connect to the factory feed fuel line. Only about 500 miles on the FMU, and Pump. Fuel line is brand new.
$350
#3
Re: Parting out the turbo kit. Garrett Turbo, Tial Gate, Aeromotive fmu, etc...
Turbo on eBay now.
If I'm not allowed to link this then you can delete it.
http://cgi.ebay.com/ebaymotors/ws/eB...270609824&rd=1
If I'm not allowed to link this then you can delete it.
http://cgi.ebay.com/ebaymotors/ws/eB...270609824&rd=1
#5
Re: Parting out the turbo kit. Garrett Turbo, Tial Gate, Aeromotive fmu, etc...
Originally Posted by redboy183
did the truck blow up
Thread
Thread Starter
Forum
Replies
Last Post
mopar318
Turbo Parts For Sale
4
09-20-2008 02:05 PM
damnraz
Turbo Parts For Sale
7
06-27-2006 09:59 AM
bipedbear
Turbo Parts For Sale
24
05-05-2005 07:05 AM