resistor box install

[quickspoolT25]

How can I wire in a resistor box? The tech section only explains how to install individual resistors. I have both so I can do it either way. Just thought resistor box (90 ls teg/auto 1gen talon inj.) would look cleaner. Thanx.

[SpankedYA!]

Basically you cut the wires like inline resistors and take the ones from the injectors and feed them to the lines coming from the resistors box. The remaining cut wires from your harness you tie together and solder all those to the larger Usually red wire.

[tranceminister]

http://www.honda-tech.com/zerothread?id=441107

Check out the "new user's FAQ" under the FI section for a few more writeups.

[quickspoolT25]

I thought thats how you did it but wasn't sure. Thanx. Keep up the boost.

[whiterice]

Originally Posted by quickspoolT25

How can I wire in a resistor box? The tech section only explains how to install individual resistors. I have both so I can do it either way. Just thought resistor box (90 ls teg/auto 1gen talon inj.) would look cleaner. Thanx.

whats yer car?
here's mine installed:
[img width=640 height=480]http://img73.exs.cx/img73/1375/p62901238xo.jpg[/img]
[img width=640 height=480]http://img73.exs.cx/img73/1573/p62901241cg.jpg[/img]

[samson]

Are all resistor boxes the same? No matter what they are off of will they work with our HMT DSM 450s? Do you have a link of one installed, BUT with pics of the resistor box not the inline resistors? Thanks!


JP

[SpankedYA!]

Originally Posted by tranceminister

http://www.honda-tech.com/zerothread?id=441107

Check out the "new user's FAQ" under the FI section for a few more writeups.

Please read the posts.

[samson]

Originally Posted by CSaddict

Please read the posts.

Sorry. I should have looked closer and searched. Thanks for not flaming thought.


JP

[T-RO]

I am your hero... lol
Heres my write-up on it
http://www.honda-tech.com/zerothread?id=736737