Reddy

For all of you wanting to do ITB's here's the specs on alot of the throttle bodies. I'll add more when I find them

MOTOR CYCLE

SUZUKI

Make/Model: GSXR600
Year: -02
Number of Tb: 4
Inside Diameter: 38mm
Center-Center (left to right from behind): 80-80-80mm
Overall Length: 83mm
Outside Diameter (intake): 44mm
Outside Diameter (filter): 45mm
Separate casting: Yes
Injector Make/Model: Keihin KN4, 0J07 AAA A
Flow Rate (45psi/100%): 240cc/min?, 13Ω
Fuel Rail: Alu casted, Inside diameter 6mm (9mm in the ends)
Additional Info: sec. throttles controlled by ECU.



Make/Model: GSXR750
Year: -98, -99
Number of Tb: 4
Inside Diameter: 46mm
Center-Center (left to right from behind): 80-80-80mm
Overall Length: 91mm
Outside Diameter (intake): 54mm
Outside Diameter (filter): 54mm
Separate casting: Yes
Injector Make/Model: Keihin,
Flow Rate (45psi/100%): 240cc
Fuel Rail Inside Diameter:
Additional Info: No sec. throttles.



Make/Model: GSXR1000
Year: -02
Number of Tb: 2
Inside Diameter: 42mm
Center-Center (left to right from behind): 80-80-80mm
Overall Length:
Outside Diameter (intake):
Outside Diameter (filter):
Separate casting: No (dual Tbīs)
Injector Make/Model: Keihin,
Flow Rate (45psi/100%): 230cc/min
Fuel Rail Inside Diameter:
Additional Info: sec. throttles controlled by ECU.



Make/Model: GSXR1000
Year: -03
Number of Tb: 2
Inside Diameter: Tapers from 50 to 42mm
Center-Center (left to right from behind):
Overall Length: 90mm
Outside Diameter (intake):
Outside Diameter (filter): 53mm
Separate casting: No (dual Tbīs)
Injector Make/Model: Keihin,
Flow Rate (45psi/100%): 230cc/min
Fuel Rail Inside Diameter:
Additional Info: Pic without secondary butterflies and fuel rail.



Make/Model: GSXR1300 (Busa)
Year: pre 2002 ?
Number of Tb: 4
Inside Diameter: 42mm at injector end, tappered from 51mm at air horn end
Center-Center (left to right from behind): 80-80-80
Overall Length: 90mm
Outside Diameter (intake): 55mm
Outside Diameter (filter): 53mm
Separate casting: Yes
Injector Make/Model: Keihin,
Flow Rate (45psi/100%): ?
Fuel Rail Inside Diameter: PA66-G35
Additional Info: no secondary butterfly



KAWASAKI

Make/Model: ZX6R 636 B1
Year: 2003
Number of Tb: 2
Inside Diameter: 38mm
Center-Center (left to right from behind): 75-75-75mm
Overall Length: 90mm
Outside Diameter (intake): 52,6mm
Outside Diameter (filter): 50,8mm
Separate casting: No (dual Tbīs)
Injector Make/Model: BOSCH 280031V
Flow Rate (45psi/100%): 245cc/min
Fuel Rail Inside Diameter:
Additional Info:



Make/Model: Z1000
Year:
Number of Tb:
Inside Diameter:
Center-Center (left to right from behind):
Overall Length:
Outside Diameter (intake):
Outside Diameter (filter):
Separate casting:
Injector Make/Model:
Flow Rate (45psi/100%):
Fuel Rail Inside Diameter:
Additional Info:



Make/Model: GPZ1100
Year: 1981-198?
Number of Tb: 4
Inside Diameter: 32mm
Center-Center (left to right from behind): 80-100-80mm
Overall Length:
Outside Diameter (intake): 40mm ("serrated")
Outside Diameter (filter): 40mm ("olived")
Separate casting: Yes
Injector Make/Model:
Flow Rate (36psi/100%): 180-200cc/min, 2,5Ω
Fuel Rail Inside Diameter:
Additional Info:



YAMAHA

Make/Model: YZF-R6
Year: 2003-2004
Number of Tb: 4
Inside Diameter: 38mm
Center-Center (left to right from behind): 72.5-72.5-72.5mm
Overall Length: 95mm
Outside Diameter (intake): 52mm
Outside Diameter (filter): 44mm
Separate casting: Not exactly, but can be cut apart easily (fuel rail)
Injector Make/Model: Keihin ?? # 250031F
Flow Rate (XXpsi/100%): XXXcc/min, 11.7Ω , 12mH
Fuel Rail: Alu casted



Make/Model: R1
Year: -04
Number of Tb: 2
Inside Diameter: 43mm
Center-Center (left to right from behind): 78-78-78mm
Overall Length:
Outside Diameter (intake):
Outside Diameter (filter):
Separate casting: No (dual Tbīs)
Injector Make/Model:
Flow Rate (45psi/100%):
Fuel Rail Inside Diameter:
Additional Info:




HONDA

Make/Model: CBR F4i
Year:
Number of Tb:
Inside Diameter:
Center-Center (left to right from behind):
Overall Length:
Outside Diameter (intake):
Outside Diameter (filter):
Separate casting:
Injector Make/Model:
Flow Rate (45psi/100%):
Fuel Rail Inside Diameter:
Additional Info:



Make/Model: RC51
Year: 2000
Number of Tb: 2, 2 injectors per TB
Inside Diameter: 48mm
Center-Center (left to right from behind): 24mm (TB's are not parallel)
Overall Length: approx 40mm
Outside Diameter (intake): 60mm
Outside Diameter (filter): 70mm (not sure how filter fits)
Separate casting: Yes, TB's are independent, mounted to linkage bracket. Modification needed of fuel pipe and linkages to change spacing.
Injector Make/Model: ?/?
Flow Rate (XXpsi/100%): XXXcc/min, approx 11Ω , ??mH
Fuel Rail: Alu casted, 1 per injector, joined by solid fuel lines
Additional Info: Comes with MAP, fuel regulator, TPS. Has a manual choke mechanism synchronized to both TBs. Not sure how it works - fast idle bleed perhaps?



Make/Model: CBR600RR3
Year:
Number of Tb: 2
Inside Diameter: 37mm
Center-Center (left to right from behind): 75-75-75mm
Overall Length:
Outside Diameter (intake):
Outside Diameter (filter):
Separate casting:
Injector Make/Model:
Flow Rate (45psi/100%):
Fuel Rail Inside Diameter:
Additional Info: Injectors mounted in cylinderhead.



Make/Model: CBR600FSi
Year:
Number of Tb: 2
Inside Diameter: 36mm
Center-Center (left to right from behind): 75-75-75
Overall Length:
Outside Diameter (intake):
Outside Diameter (filter):
Separate casting: No (dual Tbī)
Injector Make/Model:
Flow Rate (45psi/100%):
Fuel Rail Inside Diameter:
Additional Info:



Make/Model: CBR 929
Year:
Number of Tb: 4
Inside Diameter: 40mm
Center-Center (left to right from behind): 80mm-80mm-80mm
Overall Length of casting 70mm
Outside Diameter (intake): 49mm
Outside Diameter (filter): - flat flange for airbox
Separate casting: 2 twin body castings
Injector Make/Model: ?? Marked as OK24 B
Flow Rate (45psi/100%): not sure. RUns at 50psi
Fuel Rail Inside Diameter:
Additional Info: produces 150bhp at 11,500rpm from 74x54 929cc. 11.1 comp ratio, 10 litre airbox.



Make/Model: CBR900 954 Fireblade
Year:
Number of Tb: 2
Inside Diameter: 41mm
Center-Center (left to right from behind): 80-80-80
Overall Length:
Outside Diameter (intake):
Outside Diameter (filter):
Separate casting: No (dual Tbīs)
Injector Make/Model:
Flow Rate (45psi/100%):
Fuel Rail Inside Diameter:
Additional Info:



Make/Model: CBR 1100 Blackbird
Year: ??
Number of Tb: 2
Inside Diameter: 42mm
Center-Center (left to right from behind): 85-85-85mm
Overall Length:
Outside Diameter (intake):
Outside Diameter (filter):
Separate casting: No (dual Tbīs)
Injector Make/Model: Keihin
Flow Rate (43psi/100%): ~335cc/min, 13Ω
Fuel Rail Inside Diameter:
Additional Info:



SNOW-MOBILE


ARCTIC CAT

Make/Model: ZR600 Snowmobile
Year: 1998
Number of Tb: 2
Inside Diameter: 46mm
Center-Center (left to right from behind): 134.5
Overall Length: 105mm
Outside Diameter (intake): 52mm
Outside Diameter (filter): 70mm
Separate casting: Not exactly, but can be cut apart easily (fuel rail)
Injector Make/Model: ??
Flow Rate (XXpsi/100%): XXXcc/min, 2.9Ω , 5.8mH
Fuel Rail: Alu casted
Additional Info: 2-stroke snowmobile, parallel twin 600cc, 105hp

Reddy

I ordered a set the other day. I'll post up those specs by the end of next week

crx2fast

good call on this thread... lots of good info so far.. keep it goin fellas

blk-em1

hey guys im new here anyone wanna make one for me and send it down here?

90si

http://www.hilborninjection.com/prod...Id=58&CatId=39

forgot thier kit anyone got a listing of "swapable" injectors from the varis bikes ?

Xgenturbo

I thought you can seperate the GSXR 1000

splitime

I bought a set of 00-03 gsxr750 Tbs... I believe the specs were like a 50mm to 42mm taper inside. I'll get them out and measure them again at some point. They are also completely splittable.

B16CRXT

Which would be the "best"? ITB's are ------- Hawt!

JDMHB

Where can i get ITBS for my d16a6? im really trying to get them on my car if anyone has any info.........