your best 60ft times on 20x8 m/t
05-27-2006, 06:13 PM
#11
1.0 BAR
Join Date: Mar 2005
Posts: 263
Re: your best 60ft times on 20x8 m/t
Originally Posted by ****
nobody cares that you care.
actually I had a set of MT 20x8x14 and the best they'd cut was a 1.9. Baby slicks suck *****. I think I made like 4 passes on my DR's but I know I could've went faster on the DR's with some more practice then I did on the 20x8's
I did 13.9@101mph on street rubber (proxes) with a 2.2 60 ft and 13.7@100mph on DR's with a 2.0 60ft and 13.6@100mph on baby slicks with a 1.9 60ft
actually I had a set of MT 20x8x14 and the best they'd cut was a 1.9. Baby slicks suck *****. I think I made like 4 passes on my DR's but I know I could've went faster on the DR's with some more practice then I did on the 20x8's
I did 13.9@101mph on street rubber (proxes) with a 2.2 60 ft and 13.7@100mph on DR's with a 2.0 60ft and 13.6@100mph on baby slicks with a 1.9 60ft
I think that it's in the difference of the EG vs. the EF front suspension layout, along with the VERY linear powerband of the baby turbo, that donnie was able to pull those times. The setup is just efficient. It wasn't even a fluke, either, because he ran 2x1.7 and 1x1.8 60' times with those slicks.
I need traction bars. :P
05-28-2006, 05:25 AM
#13
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: your best 60ft times on 20x8 m/t
Originally Posted by Mista Bone
1.816, 13.09 @ 103 mph..........
I highly doubt a 1.72 60 foot and only running 13.5 @ 95 mph.
Were you using a stock flywheel?
Launch rpm?
Slick psi?
Staging depth?
Burnout procedure?
I highly doubt a 1.72 60 foot and only running 13.5 @ 95 mph.
Were you using a stock flywheel?
Launch rpm?
Slick psi?
Staging depth?
Burnout procedure?
Car did it twice Mr. Bone and was running 13.5-13.6 with 1.7 3 passes at 3500 elevation so no it wasnt a fluke.
stock flywheel
I have seen 13.5 at 94 out of an all motor car i was involved in with years back
Someones feelin hurt now your not that king anymore
Wanna see the videos
05-28-2006, 05:37 AM
#15
1.5 BAR
Thread Starter
Join Date: Jan 2006
Posts: 865
Re: your best 60ft times on 20x8 m/t
Originally Posted by Mista Bone
1.816, 13.09 @ 103 mph..........
I highly doubt a 1.72 60 foot and only running 13.5 @ 95 mph.
Were you using a stock flywheel?
Launch rpm?
Slick psi?
Staging depth?
Burnout procedure?
I highly doubt a 1.72 60 foot and only running 13.5 @ 95 mph.
Were you using a stock flywheel?
Launch rpm?
Slick psi?
Staging depth?
Burnout procedure?
7800 rpm launch
13-14psi
staging depth??
nice long burnout
05-28-2006, 05:48 AM
#17
1.5 BAR
Thread Starter
Join Date: Jan 2006
Posts: 865
Re: your best 60ft times on 20x8 m/t
Originally Posted by chris
I was very cold in my shorts and t shirt so im gonna say 64.5 towards nightfall
Oh and dont forgot the old act clutch that is from Goldie that has paid its dues
Oh and dont forgot the old act clutch that is from Goldie that has paid its dues
05-28-2006, 12:18 PM
#18
0.0 BAR
Join Date: Jan 2005
Posts: 0
Re: your best 60ft times on 20x8 m/t
why I asked about the stock flywheel..........extra stored energy is how you got the better 60 foots.......
BTW, thanks for proving a point, light flywheels SUCK
Vids and timeslips welcomed, I wanna see the car react to the launch.
Feelings not hurt at all, with the above info he proved a valid point for me
BTW, thanks for proving a point, light flywheels SUCK
Vids and timeslips welcomed, I wanna see the car react to the launch.
Feelings not hurt at all, with the above info he proved a valid point for me
05-28-2006, 12:22 PM
#19
0.5 BAR
Join Date: Jan 2003
Posts: 152
Re: your best 60ft times on 20x8 m/t
that is a good 60'. What car is it and how much does it weigh.What is your setup? how much psi? I have those same slicks and have only ran on them once, in the 1/8 mile. I got 2.0 60' and launched at 4500-5000.I didn't know what to launch at. What do you guys set your shocks at when you drag? I have KYB AGX on tein springs. i had them set pretty soft.
