R-MAK

How are you gonna help me when you live in Fort Mac, and I live in Calgary ? Trever, lay off the creed.

jinxy

`you have to ground the relay and the switch if you have a fancy pants lighted switch :P

Tom-Guy

Take the car to the crusher. Give up.

hatchbox90

theres a difference between AC and DC electricity

jinxy

I dont see any AC style wiring. Unless you're talking about asking raffi and boost. Then i get it :P

Donald125

enchanced version now with a relay

Ravage70

hahaha

hatchbox90

im assuming raffi and boost are electricians. correct me if im wrong on that. but if im right he is asking about DC, not AC which electricians usually deal with. why dont you just aska stereo nerd

crxtc_com

If you look on the bottom of a bosch syle 5 pin relay the pins are labeled with numbers. dot not use 87a. try and use 12 or 14 gauge wire after the relay.
http://crxtc.com/images/other/trav.jpg

here is a picture of the wire to tap off of for the switch
http://crxtc.com/images/other/g_305_...rkinglight.jpg

and if you cannot figure it out ill be in reddeer on the 18th and i may go to calgary





BITCH

d16forlife

The only diference is that one alternates and the other doesnt.The same theory aplies to both.Hot and neutral or positive and negaitive.Same ----.

Travis I cant help you with paint couse me gots no skills.http://ourworld.compuserve.com/homep...en/ohmslaw.htmthe link will take you to a calculator that will help you figure out what size fuse you will need.just add up the watage of the light bulbs,enter it into where it says "watts".then enter your voltage and it will tell you the amperage.And yes,use a relay.

Run the ground wire from the lights to the frame.Make shure you use a self tapping screw and scratch off the paint to get a good bond.From the battery run a wire to the switch and install the fuse between the battery and the switch.Run the positive wire through a switch and take that to the relay along with a ground.this will power the relay via the switch.Jumper the positive wire that will turn on the relay to the line side of the relay.Take wire from the load side of the relay to the lights and your done.