General Discussion Off-Topic Discussion and Enlightenment

we've all done it

Thread Tools
 
Search this Thread
 
Old 03-28-2006, 02:09 PM
  #1  
0.0 BAR
Thread Starter
 
hatrack48's Avatar
 
Join Date: Oct 2003
Location: Mile High--HMT
Posts: 0
Default we've all done it

well yesterday i figured i'd drive the HB to work since it was going to be nice out,(only time it comes out of the garage) and i go to start it and bang crunch boom wtf sounded like a rod kissing the wall i get out pop the hood no oil or h20 on ground, no holes to see so I jump in the dailey and go to work all day long tryin to think what could of happened, didnt get anything done at work, i was just so upset because that was all i needed since im getting ready to slap on the boost next week. well the work day was over and going home to see if i was going to cry or what. well i poped the hood again and started looking around and found a little piece of plastic which looked to part of a fin from the rad.fan and looked some more and found a 10mm socket and a 10mm wrench laying on the ground which aparantly I left in close proxsimity to the fan. well when i started it they fell into the fan at the right angle and ruined my whole day moral make sure you pick up all your tools when finished working I'm laughing at myself today
hatrack48 is offline  
Old 03-28-2006, 02:11 PM
  #2  
USS
0.0 BAR
 
USS's Avatar
 
Join Date: Oct 2004
Posts: 0
Default Re: we've all done it

Haha, i've done that a few times. Classic.
USS is offline  
Old 03-28-2006, 02:12 PM
  #3  
0.0 BAR
 
Reddy's Avatar
 
Join Date: Jun 2003
Posts: 0
Default Re: we've all done it

Alzheimers? :P
Reddy is offline  
Old 03-28-2006, 02:17 PM
  #4  
1.5 BAR
 
70Challenger's Avatar
 
Join Date: Jul 2005
Posts: 1,463
Default Re: we've all done it

i did that yesterday, i could not for the life of me get my hood to lay flush (i had just installed it so i figured it came out of adjustment becuse i didnt tighten something), but it turns out i had left the black fuse box lid ontop ot the black strut tower. I felt like a dumbass
70Challenger is offline  
Old 03-28-2006, 02:18 PM
  #5  
3.0 BAR
 
90dx's Avatar
 
Join Date: Jul 2004
Posts: 4,029
Default Re: we've all done it

I always leave the ratchet and socket attached to the crank pulley and then try to start it :P
90dx is offline  
Old 03-28-2006, 02:28 PM
  #6  
0.0 BAR
 
idiot-stick's Avatar
 
Join Date: Apr 2004
Posts: 0
Default Re: we've all done it

Originally Posted by 90dx
I always leave the ratchet and socket attached to the crank pulley and then try to start it :P
Did that a few days ago. Went flying
idiot-stick is offline  
Old 03-28-2006, 02:29 PM
  #7  
1.5 BAR
 
93z6t's Avatar
 
Join Date: Oct 2005
Posts: 1,350
Default Re: we've all done it

yeah i have a prob keepingup with screw drivers when i use them under the hood of my car and socketts also loose them all the ------- time
93z6t is offline  
Old 03-28-2006, 02:33 PM
  #8  
3.0 BAR
 
Honda16hb's Avatar
 
Join Date: Jan 2003
Posts: 7,082
Default Re: we've all done it

I use some of the places under the hood for storage, I have unused bolts and screws all over under there. I have a rag stuck in the driverside mount for checking the oil or whatever and I have wires tucked places in case I need a jumper or something.
Honda16hb is offline  
Old 03-28-2006, 03:02 PM
  #9  
1.5 BAR
 
70Challenger's Avatar
 
Join Date: Jul 2005
Posts: 1,463
Default Re: we've all done it

Originally Posted by Kyle
I use some of the places under the hood for storage, I have unused bolts and screws all over under there. I have a rag stuck in the driverside mount for checking the oil or whatever and I have wires tucked places in case I need a jumper or something.
you know most cars come with trunks now...
70Challenger is offline  
Old 03-28-2006, 03:08 PM
  #10  
3.0 BAR
 
Darkelvis's Avatar
 
Join Date: Nov 2004
Posts: 1,612
Default Re: we've all done it

I'm not sure what this engine bay thing is that you speak of, are you referring to my electrical tape storage compartment?

Every time I pop the hood I find another roll of electrical tape.
Darkelvis is offline  


Quick Reply: we've all done it



All times are GMT -5. The time now is 03:58 PM.