TURBO/TECH PROJECTS.
#11
Re:TURBO/TECH PROJECTS.
name: Eric Mitz
year: 1992
make: honda
model: Accord EX
contact info:
AIM: Ocean of Awesum
Email: Lostshootingstar@gmail.com
link to my setup: http://www.cb7tuner.com/vbb/showthre...=turbo+project
parts list:
F22a6 DSM TURBO SETUP @ 8PSI
- 1g DSM 14b turbo + wastegate
- 1g DSM turbo manifold redrilled to fit F22a
- 1g DSM "blue top" 450cc injectors
- www.johnnyracecar.com 5" intercooler
- Custom Charge pipes (old CAI and Elcipse pipes)
- Ebay special BOV (surpisingly loud)
- Stealthmodeperformance oil line kit
- Tunned with chipped p05 ECU and "Uberdata" complete standalone management.
- Autometer boost guage
- Autometer A/F ratio guage
- Custom oil catch can
- 1 step colder spark plugs
and a dyno sheet:
http://home.comcast.net/~ndd3d/195hp215tq.jpg
year: 1992
make: honda
model: Accord EX
contact info:
AIM: Ocean of Awesum
Email: Lostshootingstar@gmail.com
link to my setup: http://www.cb7tuner.com/vbb/showthre...=turbo+project
parts list:
F22a6 DSM TURBO SETUP @ 8PSI
- 1g DSM 14b turbo + wastegate
- 1g DSM turbo manifold redrilled to fit F22a
- 1g DSM "blue top" 450cc injectors
- www.johnnyracecar.com 5" intercooler
- Custom Charge pipes (old CAI and Elcipse pipes)
- Ebay special BOV (surpisingly loud)
- Stealthmodeperformance oil line kit
- Tunned with chipped p05 ECU and "Uberdata" complete standalone management.
- Autometer boost guage
- Autometer A/F ratio guage
- Custom oil catch can
- 1 step colder spark plugs
and a dyno sheet:
http://home.comcast.net/~ndd3d/195hp215tq.jpg
#12
Re:TURBO/TECH PROJECTS.
Here is my tech project lol... https://www.homemadeturbo.com/forum/...1530#msg171530
I will get some pictures gathered up and do a little write up on my turbo setup.
I will get some pictures gathered up and do a little write up on my turbo setup.
#15
Re:TURBO/TECH PROJECTS.
CSaddict
David Callahan
1996
Honda
CX hatch
aim: Spnkdya
Traction bar set up I made.
https://www.homemadeturbo.com/forum/...threadid=33519
1/4 plate steel
3/4 pipe 32"
1 1/4 pipe 36"
LH and RH 1/2" heim joints
1 1/2 angle iron
EGT gauge install.
https://www.homemadeturbo.com/forum/...threadid=33616
EGT gauge
drill bit
1/8" pipe tap
zip ties
Ram horn manifold I made.
1 1/2" schedule 40 or 10 Stainless steel pipe(about 3 feet)
1 1/2" schedule 40 or 10 SS 90's (12 total no external gate}
1 1/2" " " " " " 45's (2 total)
14" chop saw
tig welder
https://www.homemadeturbo.com/forum/...threadid=35339
David Callahan
1996
Honda
CX hatch
aim: Spnkdya
Traction bar set up I made.
https://www.homemadeturbo.com/forum/...threadid=33519
1/4 plate steel
3/4 pipe 32"
1 1/4 pipe 36"
LH and RH 1/2" heim joints
1 1/2 angle iron
EGT gauge install.
https://www.homemadeturbo.com/forum/...threadid=33616
EGT gauge
drill bit
1/8" pipe tap
zip ties
Ram horn manifold I made.
1 1/2" schedule 40 or 10 Stainless steel pipe(about 3 feet)
1 1/2" schedule 40 or 10 SS 90's (12 total no external gate}
1 1/2" " " " " " 45's (2 total)
14" chop saw
tig welder
https://www.homemadeturbo.com/forum/...threadid=35339