Aguero83

Alright guys i have an 93 accord ex 5spd.... I'm making a turbo project. ill be using as daily driver when im done. my biggest question TURBO SIZE wich one to use a T66 with .70 cold side and . 48 hot side or a t3/t4 .50 cold .63 hot....... motor is a f20z1 (NON_VTEC) swapped due to blown f22a6. motor in car is currently a 2.0 thanks to unitextrade.com out of texas. got a complete motor 595.00 free shipping ! it was so clean you could eat off of it !! so suggestions,advice,and experts chime in i want to know why i should or why i shouldn't. 10 psi goal looking for 250-275 whp . Thanks guys.

glht_omni

That t66 id way too big, that's for a big v8 and will be real laggy on a 2.0, I have experience with the 50 trim you mentioned, if you have a choice get it with a stg 1 or 2 wheel not the stg3 if you have a choice. It's very streetable and is good to around 28psi. Spoils nicely too.

METZWRX

^ + 1!

i agree. i had a t3/t4 50 trim on my S2000 build and it was great for spool up and held together well for the time i had it.

BoostedFC

Definitely not the T66, it would be overkill for you power goals & like said above would be too laggy. The 50 trim turbo should do the job just fine & still spool up at a decent rpm.