rongconcrx

i just got a turbo from a laser chrysler turbo
and having difficulty installing the turbo.."Im new to it "
so if anyone give me a sit or a write up on how to install turbo.
The part i dont get is that how do u get oil to the turbo.
i think i know what returning oil is but ,not getting where do i connect to get oil to turbo..if any one can help i would appriciated.. im just came to us not long ago,so i have troble spelling and grammer.for give me thnx

R-MAK

you tap it into your oil pan. weld a bung ( with threads ) for the oil line to bolt onto. ill give you a tip.

1. dont drain the oil ! ....... why ?
- cause when you drill the pan, you will get shavings, so save the hassle and drain the oil when your done.

davcivic

oh ----, here we go again!!!!



But to give you an idea, your block has something called an oil pressure sensor, in the back of the block, you need to take that out, and install a brass tee, one way goes back to the block, one for the oil pressure sensor, and the third side is where you connect the oil feed line that will go to the turbo.

If you search a little, and check out the turbo setups from the main page, you will see more examples of this.

get ready to be flamed also.

rongconcrx

that was a fast reply thnx

SpankedYA!

Be safe and remove the oil pan completely. You will end up with metal shavings in your engine if you leave it on.

SkunT

u wanna sell that turbo? LOL yeah check around on the web site man. you obvisouly didnt, because its explained elsewhere on the site. look around and you will see. get a stealthmode oil like kit, things will go alot easier for you. (you can find this in the classifides section)

rongconcrx

i looked and search on how oil are feed to turbo and the only thing i get is what u guys been sayin make a hole and welding it.im confuse bcuz in this site i looked at it said theres a feed line and a return line,isnt it the diff thing??
and thats what im confuse about."do u get the oil from the oil pan by making the whole in the pan and feeding the turbo,or is the whole for the returning oil thats from the turbo??
sry to ask so much,just want to learn but there no where to so if u guyz would help it be great.thnx

Guy-Fast

There is so much info here and everything has been covered dozens of times. Go through the tech sections learn and read.

mattssi

you get the oil feed from the back of the block. Where the oil pressure sensor is, you have to install a t-fitting. Then run a line from the turbo to it. The return line is connected to the oil pan, somewhere just under the lip so that the returning oil can spill into the pan and not get jammed up in the turbo! good luck, do some research!

Doofnoil

prepare, my fellow hmt brethren, for the fortold prophecy of newbie doom. Soon... swarms of information hungry newbies will descend upon this humble site and ask unknowledgable question to no end. Repent!