Torque specs for pressure plate/ flywheel??
#1
Torque specs for pressure plate/ flywheel??
Ok well i bought a ghetto *** pos 91 hatchback to drive while the accord is dead and the tranny is fuked! So im replacing it and the clutch in the next few days but i dont know what the torque specs are for the pressure plate and flywheel? Does anyone know what they are?
BTW: anyone got a link for a serivice manuel or something for one of these
THANKS!
BTW: anyone got a link for a serivice manuel or something for one of these
THANKS!
#3
Re: Torque specs for pressure plate/ flywheel??
heres some advice, dont use any thread locker on flywheel/PP bolts. Just get them as tight as you can.. prefrebley until the impact gun stops turning, or until the bolt starts stripping.
#4
Re: Torque specs for pressure plate/ flywheel??
Originally Posted by AbaZ
heres some advice, dont use any thread locker on flywheel/PP bolts. Just get them as tight as you can.. prefrebley until the impact gun stops turning, or until the bolt starts stripping.
On the real though adam its about 17 ft lb on the pp and 83 or so on the flywheel.
#7
Re: Torque specs for pressure plate/ flywheel??
on the flywheel....keep tighting that ---- until you cant turn anymore. by hand. for the pressure plate...I just snapped a head on a bolt...while tighting by hand. easy to get out...just a pain in the ***.
#9
Re: Torque specs for pressure plate/ flywheel??
Mike, I fucken hate you for that one.
Put the flywheel bolt in as hard as you can, but the pressure plate only go with what's reccomended (I think it was 18 or some ----). Whatever you do, don't call mike at lsd motorsports cause he'll tell you the pressure plate should be 87 and you'll end up with a bolt cracked off in your flywheel.
Jeff, whats the secret about not using thread locker. I got a special kinda love thang for the blue.
Put the flywheel bolt in as hard as you can, but the pressure plate only go with what's reccomended (I think it was 18 or some ----). Whatever you do, don't call mike at lsd motorsports cause he'll tell you the pressure plate should be 87 and you'll end up with a bolt cracked off in your flywheel.
Jeff, whats the secret about not using thread locker. I got a special kinda love thang for the blue.
#10
Re: Torque specs for pressure plate/ flywheel??
Originally Posted by AbaZ
for the record i have never seen a flywheel bolt break inside a crankshaft...