Took the rex to the track Thursday. Pics of slips added nignogs.
#11
Re: Took the rex to the track Thursday. Pics of slips added nignogs.
you should be better then that, im doin 8.4's in the 1/8th and im running an ls turbo on 7 pounds in an heavy *** eg si. just get alot of seat time and it will help out
#12
Re: Took the rex to the track Thursday. Pics of slips added nignogs.
i was running 9.0 @85 mph but that was spinning entirely thru the first 2 gears and with like a 2.4 60 ft on the accord on 13psi, i think you should be running faster than that also.
#13
Re: Took the rex to the track Thursday. Pics of slips added nignogs.
Originally Posted by B16CRXT
oh yea. Joey, dont forget I have an LS tranny on my b16 Thats prolly why its not as fast as you think it should be...
Originally Posted by B16CRXT
on the launch I would get some wheel hop and the wheels would spin a bit then grab and the rpm would just fall. it was gay.
2) A little spin is okay, but (wheelhop aside) the bogging is what kills your launch. As long as the engine isn't revving everywhere and you're practically sitting still, a little wheelspin is *good*. Like Bone said, best tire grip is at 10% wheelspin.
#14
Re: Took the rex to the track Thursday.
Originally Posted by Joseph Davis
Post the slips. IMO you should be trapping a LOT higher.
Wheel hop is the devil. Get some Energy Suspension of Prothane bushings for your LCAs, make sure your ball joints don't have any slop, and either drop the money on a set of radius rods or you can get decent results with $12 worth of Energy Suspension radius rod bushings.
The super stiff 80A durometer inserts are all well and good, and needed past a certain level, but I don't think you're at that level yet.
Wheel hop is the devil. Get some Energy Suspension of Prothane bushings for your LCAs, make sure your ball joints don't have any slop, and either drop the money on a set of radius rods or you can get decent results with $12 worth of Energy Suspension radius rod bushings.
The super stiff 80A durometer inserts are all well and good, and needed past a certain level, but I don't think you're at that level yet.
#18
Re: Took the rex to the track Thursday. Pics of slips added nignogs.
What's goin on here?
That was my best run of the day my first time ever at the track.
Stock internals B16
Intake
2.25" side exit exhaust
Zdyne Swap ECU
2000lbs HF CRX
Y1 tranny
Not a bad time for a N/A B16 CRX but it definately had a lot more left in it since I couldn't hook up in 1st or 2nd gear at all since I was running on some heavy *** motegi 16" wheels with cumhoe 712 low profile tires.
I don't really understand why you didn't run much faster than me...could have something to do with the tranny and wheelhop. I guess this puts to rest the longer gears are better for turbo myth, atleast in this case.
Get some more seat time in, you should be doing better than that.
I just re-read your post and a B16 w/ a 60 shot ran 9.7? Maybe I've got a freak motor. :1
That was my best run of the day my first time ever at the track.
Stock internals B16
Intake
2.25" side exit exhaust
Zdyne Swap ECU
2000lbs HF CRX
Y1 tranny
Not a bad time for a N/A B16 CRX but it definately had a lot more left in it since I couldn't hook up in 1st or 2nd gear at all since I was running on some heavy *** motegi 16" wheels with cumhoe 712 low profile tires.
I don't really understand why you didn't run much faster than me...could have something to do with the tranny and wheelhop. I guess this puts to rest the longer gears are better for turbo myth, atleast in this case.
Get some more seat time in, you should be doing better than that.
I just re-read your post and a B16 w/ a 60 shot ran 9.7? Maybe I've got a freak motor. :1
#20
Re: Took the rex to the track Thursday. Pics of slips added nignogs.
hmm. I'm gonna adjust my toe tomorrow and buy myself some radius rod bushings soon and see if that helps. I'll also only run with the street tires cold from now on. No warming up at all. If I do need a new tranny, I'll make sure to ask you joey I'm gonna revuild the turbo before I run it again too. Get a damn good rebuild from blaastperformance.com for $150 shipped with a ceramic coated center section..