thoughts on my build
10-22-2006, 05:27 PM
#1
1.0 BAR
Thread Starter
Join Date: Oct 2003
Posts: 602
thoughts on my build
Well ladies and gents I finally decided to build my engine since I just recieved a 95 4dr civic for free.
chasis: 95 civic EX 4dr w/ ABS
D16z6: Decked, honed, cleaned (was going to fill but to lazy)
Built head (purchased from our very own classifieds): Crower stg. 2 turbo cam, springs, retainers, Ferra turbo valves, mild P&P
Scat H-Beams
Vitara pistons (std. bore)
Cometic head gasket, copper sprayed (std. bore and thickness)
ARP head studs
Polished and balanced crank
OBX intake mani, port matched
DSM 450cc injectors w/ xenocron chipped P28
OBX aluminum Radiator (works great!)
Low temp fail safe thermostat
Light weight pulley kit (all around)
LSD motor sports 6 puck sprung clutch w/ 8lbs flywheel
OBX helical LSD
B&M single bend short throw
new slave and master clutch cylinders
Turbonetics T3/ T4 w/ hig pressure backplate (came from DRAG DOHC kit)
LSD motor sports log mani and 2.5 in DP
2.5in cat delete ( soon to have E-cutout)
2.5 N1 exhaust
Aquamist water/ meth injection (soon to have a Devils own controller)
Drag intercooler and piping w/ greddy Type-R BOV
Electronic fan controller
HKS EVC III boost controller (soon to have Tullos tech)
I'll have pics soon since I start the build process tuesday.
chasis: 95 civic EX 4dr w/ ABS
D16z6: Decked, honed, cleaned (was going to fill but to lazy)
Built head (purchased from our very own classifieds): Crower stg. 2 turbo cam, springs, retainers, Ferra turbo valves, mild P&P
Scat H-Beams
Vitara pistons (std. bore)
Cometic head gasket, copper sprayed (std. bore and thickness)
ARP head studs
Polished and balanced crank
OBX intake mani, port matched
DSM 450cc injectors w/ xenocron chipped P28
OBX aluminum Radiator (works great!)
Low temp fail safe thermostat
Light weight pulley kit (all around)
LSD motor sports 6 puck sprung clutch w/ 8lbs flywheel
OBX helical LSD
B&M single bend short throw
new slave and master clutch cylinders
Turbonetics T3/ T4 w/ hig pressure backplate (came from DRAG DOHC kit)
LSD motor sports log mani and 2.5 in DP
2.5in cat delete ( soon to have E-cutout)
2.5 N1 exhaust
Aquamist water/ meth injection (soon to have a Devils own controller)
Drag intercooler and piping w/ greddy Type-R BOV
Electronic fan controller
HKS EVC III boost controller (soon to have Tullos tech)
I'll have pics soon since I start the build process tuesday.
10-22-2006, 06:08 PM
#5
3.0 BAR
Join Date: Aug 2004
Posts: 2,028
Re: thoughts on my build
Originally Posted by kamilk69
ive heard that aftermarket pulleys are ---- becuase the dont have dampening, which vibrates the ---- out of engine parts.
Seems like a lot of sacrifice for not a lot of performance.
10-23-2006, 02:55 AM
#8
1.0 BAR
Thread Starter
Join Date: Oct 2003
Posts: 602
Re: thoughts on my build
Originally Posted by Snafubmx234
My thoughts are that you should have waited until you actually did something, rather than wasting my time.'
But then again, you have a wicket sweet 2.5" cat delete. Holy ---- dud, that's some sick ----
But then again, you have a wicket sweet 2.5" cat delete. Holy ---- dud, that's some sick ----
Well I just woke up (here in germany) I going toget the car and tow it to the shop. Wish me luck
Thread
Thread Starter
Forum
Replies
Last Post
