spent some time working & Drinking on my car few pics
03-18-2006, 08:49 PM
#1
1.0 BAR
Thread Starter
Join Date: Mar 2005
Posts: 384
spent some time working & Drinking on my car few pics
Well some of you guys may know i have been complaining about some bucking issues with my car when it was on a decell. i spent the day installing some parts,harness bar, the last of my gauges and about 3 hours on this bucking issue.
the car with my stock front end on it
my ghetto fab gauges
note in the corner the wood screws :1 all we had to work with and didn't want to go to the store.still had alot left to do
the harness bar.
Now my bucking problem. Started to do a boost leak test with a homemade boostleak tester. then noticed something i really never noticed before. I have a Greddy GSR manifold and not the Civic manifold. Something i never noticed before. :1
in the middle of pulling the head apart we notice this.
this injector is soaked in oil. Prolly from when i fried my rings and never cleaned it off.
We start putting this thing back together and just pull the injector clip and there is a pool of oil there. We bust out the air compressor blow it all out clean it up. In the middle of all this fedex shows up and drops my buddies stuff off.
3" down pipe with E cutout 3"exhaust
going on this
We did some more drinking and were talking about installing his stuff on his car next weekend and decided it was time to start my car and see if we fucked anything up.
Car runs great no more bucking. Dave/Jeff sorry for ever bugging you guys about my problem. Now who is racing tomorrow>
the car with my stock front end on it
my ghetto fab gauges
note in the corner the wood screws :1 all we had to work with and didn't want to go to the store.still had alot left to do
the harness bar.
Now my bucking problem. Started to do a boost leak test with a homemade boostleak tester. then noticed something i really never noticed before. I have a Greddy GSR manifold and not the Civic manifold. Something i never noticed before. :1
in the middle of pulling the head apart we notice this.
this injector is soaked in oil. Prolly from when i fried my rings and never cleaned it off.
We start putting this thing back together and just pull the injector clip and there is a pool of oil there. We bust out the air compressor blow it all out clean it up. In the middle of all this fedex shows up and drops my buddies stuff off.
3" down pipe with E cutout 3"exhaust
going on this
We did some more drinking and were talking about installing his stuff on his car next weekend and decided it was time to start my car and see if we fucked anything up.
Car runs great no more bucking. Dave/Jeff sorry for ever bugging you guys about my problem. Now who is racing tomorrow>
. what are they? :P
03-19-2006, 02:58 AM
#8
3.0 BAR
Join Date: Dec 2002
Posts: 3,830
Re: spent some time working & Drinking on my car few pics
^^^^ That Si had THE sweetest timing map Ive ever seen, lol.
I like those gauges Donovan. The carbon fiber w/ wood screws is just the icing on the cake
"you pay a little extra for that..."
I like those gauges Donovan. The carbon fiber w/ wood screws is just the icing on the cake
"you pay a little extra for that..."
03-19-2006, 08:30 AM
#10
1.0 BAR
Thread Starter
Join Date: Mar 2005
Posts: 384
Re: spent some time working & Drinking on my car few pics
Originally Posted by Random Hero
ya.. thats what happend when i dont tune.. lol....
Tell the guy with the srt I said hi! Hes a really cool fella.
-Josh
Tell the guy with the srt I said hi! Hes a really cool fella.
-Josh
