PUSHING CAR OFF CLIFF
05-28-2005, 07:49 PM
#1
3.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 4,401
PUSHING CAR OFF CLIFF
ok well after swapping in a puny sohc motor last weekend, the car would run great but if i tried reving past 4k it would bog then be ok and bog again.
it started getting worst. then i couldnt rev past 3k and teh car would misfire. the tach was all over the place. i figured it might be the ignitor or coil going bad so i swaped them with the dizzy from my dohc motor in to the dizzy from the sohc. same issue. tach was still all over theplace. i would cruising at 2500rpms and the needle would be bouncing everywhere then the car would start to stutter.
well on friday it started doing it again so i gavve it gas and then the car reved all the way to about 5k and then died.
now i dont even get a ecu light and i dont hear the fuel pump. my afc wont turnn on either. the car will turn over.
other electrical components do work like the windows and radio.
i changed out the main relay and same ish. no blown fuses. i tried a different ecu same ish.
now im thinking i may have had some type of currentt overload that was making my tach go nuts and mess with my dizzy. and when i managed to rev it to 5k it blew something. but what?
help me
im tired of fixing crap. i just want to enjoy my dam boost.
it started getting worst. then i couldnt rev past 3k and teh car would misfire. the tach was all over the place. i figured it might be the ignitor or coil going bad so i swaped them with the dizzy from my dohc motor in to the dizzy from the sohc. same issue. tach was still all over theplace. i would cruising at 2500rpms and the needle would be bouncing everywhere then the car would start to stutter.
well on friday it started doing it again so i gavve it gas and then the car reved all the way to about 5k and then died.
now i dont even get a ecu light and i dont hear the fuel pump. my afc wont turnn on either. the car will turn over.
other electrical components do work like the windows and radio.
i changed out the main relay and same ish. no blown fuses. i tried a different ecu same ish.
now im thinking i may have had some type of currentt overload that was making my tach go nuts and mess with my dizzy. and when i managed to rev it to 5k it blew something. but what?
help me
im tired of fixing crap. i just want to enjoy my dam boost.
05-28-2005, 08:02 PM
#5
3.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 4,401
Re: PUSHING CAR OFF CLIFF
Originally Posted by d16forlife
I think you should do as the title of this thread states :P(sorrry.....I had to 
)
)dam i dont know where the hell im gona find a complete harness to even try that
