Old skool CRX/Civic With a brown top...WhiteRice where you at?
12-04-2004, 03:16 PM
#21
1.5 BAR
Join Date: Dec 2002
Posts: 800
Re:Old skool CRX/Civic With a brown top...WhiteRice where you at?
Originally Posted by ****
so the d16a1 will bolt into a civic/crx?
from what i was told the mounts on the block were too far off to be used without some serious custom mounts.
from what i was told the mounts on the block were too far off to be used without some serious custom mounts.
The crx and civics had zc's both carbed and fi'ed in JDM land. Our d16a1 is a lesser engine than the zc.
Here's some pics of my POS:
This one is taken a few years back with a d16a1 in the car:
Here's my baby(88-89 d16a1 lower end):
Another...you can see the eagle rods:
Here it is in my car with a ZC head:
For the bling bling effect:
Here's another random of my 00 altima se 5speed taken at yellowstone national park over the summer:
12-04-2004, 03:33 PM
#23
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re:Old skool CRX/Civic With a brown top...WhiteRice where you at?
Piece of my heart is with the 1gen rex/3rd gen civic. Alot of my old school buddies had them ef's were way expensive and you could get the old school rex's for less than a 1g. I wouldnt mind getting one the guage cluster in them are sweet and the dash
12-04-2004, 03:44 PM
#24
1.5 BAR
Join Date: Dec 2002
Posts: 800
Re:Old skool CRX/Civic With a brown top...WhiteRice where you at?
Originally Posted by Semnos
How much are you boosting that thing??
1/4 times??
1/4 times??
My best run to date on street tires with an open diff spinning 1st 2nd and 3rd gears was 13.7 @ 107.
The car is coming off the road soon. I am picking up an 87 hf converted to fuel injection already with a d16a1 in it from a friend. So this winter I will be buying a real manifold, turbo, 450's and an afc. Then I should be in the low 12's.
12-04-2004, 04:30 PM
#25
1.0 BAR
Join Date: Dec 2002
Posts: 362
Re:Old skool CRX/Civic With a brown top...WhiteRice where you at?
Originally Posted by ****
so the d16a1 will bolt into a civic/crx?
from what i was told the mounts on the block were too far off to be used without some serious custom mounts.
from what i was told the mounts on the block were too far off to be used without some serious custom mounts.
12-04-2004, 04:35 PM
#26
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re:Old skool CRX/Civic With a brown top...WhiteRice where you at?
12-04-2004, 06:07 PM
#28
1.5 BAR
Join Date: Dec 2002
Posts: 800
Re:Old skool CRX/Civic With a brown top...WhiteRice where you at?
Originally Posted by ****
whats the diff on the d16a1 vs. ZC, comp ratios vary much?
ALthough I haven't taken my d16a1 apart yet so i am not sure about the pistons, but i'd think they're the same along with the rods. The cams are different along with the IM design and TB. The ZC has a dual butterfly setup on the TB while the d16a1 only has one large one. I'm pretty sure the ZC's also had a 4-2-1 exhaust mani. That's all i can think of off the top of my head.
Thread
Thread Starter
Forum
Replies
Last Post
Semnos
General Discussion
18
09-10-2004 08:22 PM
