NOOB post
01-21-2008, 11:38 PM
#11
0.0 BAR
Join Date: Nov 2004
Posts: 0
Re: NOOB post
1987 csx #516 no rust at all no where
recently rebuilt engine its an 86 block so the numbers don't match
89 turbo 2 rods
new oil pump, distributor, plugs wires, etc.
rebuilt trans
newer turbo the trans and turbo according to previous owner
turbos unleashed 6puck street n strip clutch
filled front motor mount
2.5inch turbo back exahust from fwd performance
k and n drop in filter
turbo xs type h racing bov
mopar perforance stage 2 pcm
afpr
flex fuel injectors
new tires
simple bleed for wastegate but currently off to break in clutch
new drivers side axle, used but good passenger axle
68,xxx origional miles
all shelby items intact, except for mobil one plaque which is in the glove box
car put down 170 hp and 215 ft lbs of trq. at the wheels with a slightly slipping clutch and the timing off a bit too
its pretty quick
I have some things to wrap up on it to get it back on the road and running good
the bad:
dent in drivers door
clutch squeals when pushed in till warmed up, don't know what this is since i put a new throw out bearing in and clutch litterally 5 miles ago
weather stripping is dry rotting a bit due to it being 20yrs old, paint is fading a bit but absolutely no rust anywhere on the car thats why I bought it, I drove 5 hrs each way to pick it up.
missing headliner
I still have to get it running again, I just have to motivate myself to get to work on it but I've been really busy lately
Once I get it going I was gonna ask $4,000 obo
old pics from previous owner before i put new tires on
looks slightly different under the hood now but not much
heres my old es, it was a turbo 1 auto car with a npr intercooler, turbo xs boost controller, dsm bov, 2inch charge pipes, homemade air intake with air box, vaccum manifold, 180 tstat, no cat, magnaflow muffler, colder plugs, drag radials and I think thats it probually missing a few things, best time of 9.2 in the 1/8th and 14.54 in the 1/4
recently rebuilt engine its an 86 block so the numbers don't match
89 turbo 2 rods
new oil pump, distributor, plugs wires, etc.
rebuilt trans
newer turbo the trans and turbo according to previous owner
turbos unleashed 6puck street n strip clutch
filled front motor mount
2.5inch turbo back exahust from fwd performance
k and n drop in filter
turbo xs type h racing bov
mopar perforance stage 2 pcm
afpr
flex fuel injectors
new tires
simple bleed for wastegate but currently off to break in clutch
new drivers side axle, used but good passenger axle
68,xxx origional miles
all shelby items intact, except for mobil one plaque which is in the glove box
car put down 170 hp and 215 ft lbs of trq. at the wheels with a slightly slipping clutch and the timing off a bit too
its pretty quick
I have some things to wrap up on it to get it back on the road and running good
the bad:
dent in drivers door
clutch squeals when pushed in till warmed up, don't know what this is since i put a new throw out bearing in and clutch litterally 5 miles ago
weather stripping is dry rotting a bit due to it being 20yrs old, paint is fading a bit but absolutely no rust anywhere on the car thats why I bought it, I drove 5 hrs each way to pick it up.
missing headliner
I still have to get it running again, I just have to motivate myself to get to work on it but I've been really busy lately
Once I get it going I was gonna ask $4,000 obo
old pics from previous owner before i put new tires on
looks slightly different under the hood now but not much
heres my old es, it was a turbo 1 auto car with a npr intercooler, turbo xs boost controller, dsm bov, 2inch charge pipes, homemade air intake with air box, vaccum manifold, 180 tstat, no cat, magnaflow muffler, colder plugs, drag radials and I think thats it probually missing a few things, best time of 9.2 in the 1/8th and 14.54 in the 1/4
01-22-2008, 10:45 AM
#12
0.5 BAR
Thread Starter
Join Date: Jan 2008
Posts: 69
Re: NOOB post
Those are 2 really nice kcars! thats one of the best looking csx's i have seen.
damn, i hate being poor and a student i dont think i can spare 4k.... ----. maybe one day i will have some money for a #'ed selby.
damn, i hate being poor and a student i dont think i can spare 4k.... ----. maybe one day i will have some money for a #'ed selby.
01-22-2008, 07:48 PM
#14
3.0 BAR
Join Date: Mar 2003
Posts: 21,479
Re: NOOB post
Thread
Thread Starter
Forum
Replies
Last Post
sanjiyan69
Forced Induction
27
08-02-2006 11:07 PM
