newb here thought I'd share some of my current project pics
10-02-2007, 12:34 AM
#1
0.5 BAR
Thread Starter
Join Date: Oct 2007
Posts: 57
newb here thought I'd share some of my current project pics
So between work, my daughter, and everything else I've been trying to finish a couple of projects that have been on going for WAY TOO ------- LONG!!! I've been building the crx for 5 years. And the civic is a Cali shell(really clean minus the doors) so I b swapped it and will probably boost it as well. The civic used to have a boosted 1st gen integra motor in it. I just came up on another b swap that I couldn't pass on. It runs and drives finally after almost a year of tinkering with it. I still have to do a wire tuck on it, change out the fuel lines, etc and then it's getting torn down to restore it over the winter. Hopefully the rex will be drag strip ready next spring also. There's tons of stuff not in the pics for the rex. I just want to finish all of the fab before I start assembling it again. Cage is all chromoly. basically 8 pt with drivers door x and full halo. traction bars. I tubed from the strut towers down to the frame fronts. If I'd gone through the fire wall at the time it would put me into the hotrod class that I def don't have the power for. Now the rules are a little diff though I believe.
So anyway just thought I'd share. And I'll share the progress also. Hopefully be able to post a vid of a nasty burnout or 2 from out front of my house when its done also!!!!!
Yeah I know a wiring ------- nightmare!!! I built the full harness from bits of others and new wiring. Never again. So thats me actually showing some patience in a place I don't like to be.
So anyway just thought I'd share. And I'll share the progress also. Hopefully be able to post a vid of a nasty burnout or 2 from out front of my house when its done also!!!!!
Yeah I know a wiring ------- nightmare!!! I built the full harness from bits of others and new wiring. Never again. So thats me actually showing some patience in a place I don't like to be.
10-02-2007, 01:53 AM
#8
1.5 BAR
Join Date: Jul 2005
Posts: 1,205
Re: newb here thought I'd share some of my current project pics
I think the flaming for you wont be bad because of that badass attempt to undergo the nightmare of making your own wiring harness. +1 and some **** will make you untouchable in a sense for when it comes to newbs.
10-02-2007, 02:32 AM
#9
3.0 BAR
Join Date: Apr 2005
Posts: 6,036
Re: newb here thought I'd share some of my current project pics
Originally Posted by crxtuner
I think the flaming for you wont be bad because of that badass attempt to undergo the nightmare of making your own wiring harness. +1 and some **** will make you untouchable in a sense for when it comes to newbs.
