aaronsrex

ok. so i went to take my engine temp sensor off the side of the block. put a deep socket on it. started losening it up. and the ****** broke. so the threads are still stuck in it. but the plug part kinda broke off jus bearly puting any pressure on it" probly cause it was so old" dont know. but yea. anyone have some ideas on how to get the part out thats stuck in there? without having to pull the ------ head an all that ---- off

fork

use an easy out, they suck though. and you have to drill through the bolt, or whatever. when you drill put a ton of grease on the bit to keep shavings out of the water passage

aaronsrex

HAAAHAHA ok. never mind guys i got it. i kinda used a flat head screw driver and hammer. hammered the screwdriver into the little opening between the threads. and jus twisted it out. lol whatever works right?