Name this part and it's function:
#12
Re:Name this part and it's function:
Originally Posted by highroller54
I think its just a little acumulator to soften out the fuel preshure spikes? If that makes any sence
Originally Posted by highroller54
Thats what I was tring to say I would make a terable teacher. I dont think it could make you run rich. Have you acually checked your fuel preshure boostie? Hows your o2 sensor? tell us more
Originally Posted by highroller54
I would make a terable teacher.
#14
Re:Name this part and it's function:
Originally Posted by kain
depends. i threw mine out on my rx7 and replaced it with a banjo bolt and it works fine.
basically the theory is to prevent pulsations form the injectors opening and closing. the result in this some people say is some parts of your fiel system exploding. i could see this happening if you run a solid line fuel system, but i have also come to notice that it doesnt happen to cars with non solid fuel lines. my rx7 doesnt have solid fuel lines and the rubber lines absorbe the pulsations.
when things explode its likely a cause of water hammer.
basically the theory is to prevent pulsations form the injectors opening and closing. the result in this some people say is some parts of your fiel system exploding. i could see this happening if you run a solid line fuel system, but i have also come to notice that it doesnt happen to cars with non solid fuel lines. my rx7 doesnt have solid fuel lines and the rubber lines absorbe the pulsations.
when things explode its likely a cause of water hammer.
Originally Posted by kain
also, i wouldnt advise driving it again untill you get a new one. if the screw falls out that could be a sign its bad. mine was completely fucked. my screw was out and the flapper got sealed shut and the bastard part popped spewing fuel on the exhaust manifold. so i chucked it and replaced it with a banjo bolt cus they dont do ---- and are far more cheaper. also, some aftermarket fuel pressure regulators have them ( pulsation dampeners ) built in.
many rx7's have died from this.
many rx7's have died from this.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#16
Re:Name this part and it's function:
Originally Posted by Dr.Boost
Originally Posted by kain
depends. i threw mine out on my rx7 and replaced it with a banjo bolt and it works fine.
basically the theory is to prevent pulsations form the injectors opening and closing. the result in this some people say is some parts of your fiel system exploding. i could see this happening if you run a solid line fuel system, but i have also come to notice that it doesnt happen to cars with non solid fuel lines. my rx7 doesnt have solid fuel lines and the rubber lines absorbe the pulsations.
when things explode its likely a cause of water hammer.
basically the theory is to prevent pulsations form the injectors opening and closing. the result in this some people say is some parts of your fiel system exploding. i could see this happening if you run a solid line fuel system, but i have also come to notice that it doesnt happen to cars with non solid fuel lines. my rx7 doesnt have solid fuel lines and the rubber lines absorbe the pulsations.
when things explode its likely a cause of water hammer.
Originally Posted by kain
also, i wouldnt advise driving it again untill you get a new one. if the screw falls out that could be a sign its bad. mine was completely fucked. my screw was out and the flapper got sealed shut and the bastard part popped spewing fuel on the exhaust manifold. so i chucked it and replaced it with a banjo bolt cus they dont do ---- and are far more cheaper. also, some aftermarket fuel pressure regulators have them ( pulsation dampeners ) built in.
many rx7's have died from this.
many rx7's have died from this.
#20
Re:Name this part and it's function:
yah, beat the snot out of it. those 1st gens are really good. put a p port in it and expect huge gains. somewhere between 250 to 300+ with other mods. but it would be a race engine if you p port it.