My "minimalist" turbo crx **just ran 12.9: video**
#41
Re: My "minimalist" turbo crx **VIDEO ADDED!**
Just a quick update. Over the course of the few months this has been together, I decided to swap in a crower stg. 2 N/A cam. I left the dizzt right where it was(didn't even remove it) and swapped rocker assemblies as well. Well... Apparently the notch on the dizzy side was machined very off from the d15z1 cam, and that led to HUGE timing advance. About 15 degrees, huge. Needless to say, I busted ringlands.
Out came the old, and in went a refreshed d15b bottom end. Same head, same everything. It's now running about 11psi, and is pretty wicked. I'll make another video soon.
The other night, a few buddies and our wives went out to a new steakhouse on the outskirts of town. I decided to park out front, in front of a parking-barrier(fancy word for log) and tapped it. My wife asked if I broke anything, and I sad, no no. Well, we get ready to leave, I drive down the road, and water temp is up toward 225*F. I shut it down and get out to find my radiator taking a leak. So, I got another, and installed it, and it runs very well.
I'm going to give the cam another shot, here, in the next month or two, after a baseline run out in bakersfield.
Thanks for the tips, JD, I've incorporated them carefully.
-josh-
Out came the old, and in went a refreshed d15b bottom end. Same head, same everything. It's now running about 11psi, and is pretty wicked. I'll make another video soon.
The other night, a few buddies and our wives went out to a new steakhouse on the outskirts of town. I decided to park out front, in front of a parking-barrier(fancy word for log) and tapped it. My wife asked if I broke anything, and I sad, no no. Well, we get ready to leave, I drive down the road, and water temp is up toward 225*F. I shut it down and get out to find my radiator taking a leak. So, I got another, and installed it, and it runs very well.
I'm going to give the cam another shot, here, in the next month or two, after a baseline run out in bakersfield.
Thanks for the tips, JD, I've incorporated them carefully.
-josh-
#43
Re: My "minimalist" turbo crx **VIDEO ADDED!**
Originally Posted by AMkrew
Just a quick update. Over the course of the few months this has been together, I decided to swap in a crower stg. 2 N/A cam. I left the dizzt right where it was(didn't even remove it) and swapped rocker assemblies as well. Well... Apparently the notch on the dizzy side was machined very off from the d15z1 cam, and that led to HUGE timing advance. About 15 degrees, huge. Needless to say, I busted ringlands.
Out came the old, and in went a refreshed d15b bottom end. Same head, same everything. It's now running about 11psi, and is pretty wicked. I'll make another video soon.
The other night, a few buddies and our wives went out to a new steakhouse on the outskirts of town. I decided to park out front, in front of a parking-barrier(fancy word for log) and tapped it. My wife asked if I broke anything, and I sad, no no. Well, we get ready to leave, I drive down the road, and water temp is up toward 225*F. I shut it down and get out to find my radiator taking a leak. So, I got another, and installed it, and it runs very well.
I'm going to give the cam another shot, here, in the next month or two, after a baseline run out in bakersfield.
Thanks for the tips, JD, I've incorporated them carefully.
-josh-
Out came the old, and in went a refreshed d15b bottom end. Same head, same everything. It's now running about 11psi, and is pretty wicked. I'll make another video soon.
The other night, a few buddies and our wives went out to a new steakhouse on the outskirts of town. I decided to park out front, in front of a parking-barrier(fancy word for log) and tapped it. My wife asked if I broke anything, and I sad, no no. Well, we get ready to leave, I drive down the road, and water temp is up toward 225*F. I shut it down and get out to find my radiator taking a leak. So, I got another, and installed it, and it runs very well.
I'm going to give the cam another shot, here, in the next month or two, after a baseline run out in bakersfield.
Thanks for the tips, JD, I've incorporated them carefully.
-josh-
busted radiator.
you were lucky I always carry a tow rope in the truck lol. (Ive had to use it a few times my own car lol)
soken tomorrow?
Originally Posted by chris
glad to see it up and running. Ill be back in the rc here shortly with some fun dohc vtec stuff .
schedueled to pick up a motor tomorrow.
#45
Re: My "minimalist" turbo crx **just ran 12.9: video**
Nice runs. Glad I could assist you getting into the 12s.
Its good to see our crew runnin 12's on the ole' 1.5's.
jdm D15b vtec's FTW, hahaha
time to move on!!! I feel 11's coming on in a few months. (personally anyways)
Its good to see our crew runnin 12's on the ole' 1.5's.
jdm D15b vtec's FTW, hahaha
time to move on!!! I feel 11's coming on in a few months. (personally anyways)
#47
Re: My "minimalist" turbo crx **just ran 12.9: video**
Originally Posted by chris
The soken 1.5 reps well atleast for everyone else mine blew up driving down the street :1. Nice work josh. Hope to be out there with you guys with the white car shortly
come on down
I think I may have some stuff that you may want off the b series in exchange for some "goods"