General Discussion Off-Topic Discussion and Enlightenment

Mechanics Hall Of Shame...

Old 04-13-2004, 01:28 AM
  #11  
3.0 BAR
 
Spenser's Avatar
 
Join Date: Aug 2003
Posts: 3,930
Default Re:Mechanics Hall Of Shame...

I used a couple pop cans and some hose clamps to fix a big hole in my exhaust. I also used a sock for a air filter. umm yeah I don't do stupid things.
Spenser is offline  
Old 04-13-2004, 01:46 AM
  #12  
1.0 BAR
 
MR2Turbo's Avatar
 
Join Date: Feb 2003
Posts: 390
Default Re:Mechanics Hall Of Shame...

Took me 30 mins to find the battery in my MR2.
MR2Turbo is offline  
Old 04-13-2004, 08:08 AM
  #13  
3.0 BAR
 
imadouche's Avatar
 
Join Date: May 2003
Posts: 1,751
Default Re:Mechanics Hall Of Shame...

I was changing my oil in an apartment complex across the street from campus First of all I just kind of let the oil drain onto the concrete secondly I had to **** real bad and i was in A hurry so before filling it back up I lowered the right side down off the jack and started filling it up I put in 3.25 quarts but it was no where near full so Im like what the ---- so I just kept dumping oil in till it was full then lowered the other side got in my car and started it up and it was smoking like a crack----- I was confused so I checked the dipstick and it was way overfilled. It was stupid the end
imadouche is offline  
Old 04-13-2004, 11:11 AM
  #14  
1.5 BAR
 
airtonics's Avatar
 
Join Date: Feb 2003
Posts: 1,067
Default Re:Mechanics Hall Of Shame...

The most recent one was when I put my new fuel gauge on my fuel rail. I drilled into the rail, tapped it and got the gauge to fit. Hooked everything back up but didnt seal the FPR correctly. Well i started the car without really looking for leaks like i normally do and i put my hand on the throttle and reved the car to see if the fuel pressure changed. All of a sudden my hand and the car are engulfed in flames! I ran and shut the car off, scrambled franticly having to go back to the faucet to get more water to put out the burning wires.

Literall the whole engine bay was on fire it was nuts. Nothing was really damaged except some wiring conduet crap... so i replaced that and all was well. End of stupid story
airtonics is offline  
Old 04-13-2004, 01:54 PM
  #15  
1.0 BAR
 
B00M3R's Avatar
 
Join Date: Feb 2004
Posts: 240
Default Re:Mechanics Hall Of Shame...

I was replacing the flywheel in my RX-7 (stock are 30lbs) I couldnt get it to budge so I pryed on it from the bottom with a pry bar while laying under it and it poped right off and landed on my head. I still have a scar on my forhead of the teath for the starter.
B00M3R is offline  
Old 04-14-2004, 11:01 AM
  #16  
3.0 BAR
 
projekteg's Avatar
 
Join Date: Apr 2003
Posts: 11,058
Default Re:Mechanics Hall Of Shame...

one time i pulled up to the gas station to check my tire pressure, well, i inflated all them to exactly 35 psi, but when i got home, i checked again, and one was at 36 psi, i must have made a mistake that was some crazy/scary ----, i thought my whole suspension was going to be fucked up, but it's still good, i just cross my fingers every day. nobody can beat that.
projekteg is offline  
Old 04-14-2004, 11:18 AM
  #17  
1.5 BAR
 
SpeedyJAY's Avatar
 
Join Date: Jul 2003
Posts: 828
Default Re:Mechanics Hall Of Shame...

One time I pulled into the gas station, and intended to fill my tank. I thought 20$ would cover it. Turned out I needed more, and when I pulled away I had WAY less then a full tank. I was like WTF

So I got out of my less then full of gas car and walked back two blocks and pimpslapped the gas attendant. Only it wasnt the attendant it was an old lady. Not just any old lady either, but it was Nancy Reagan.

So I was like, "WTF Reagon Bitch why you sell me short," and she was like,"WTF SpeedyJay, (cause she frequents HMT and knows my screenname) why you think Nancy Reagon work at Exxon."

So I just said no walked back and drove off
SpeedyJAY is offline  
Old 04-14-2004, 11:50 AM
  #18  
Administrator
 
HMT-Admin's Avatar
 
Join Date: Dec 2002
Posts: 13,991
Default Re:Mechanics Hall Of Shame...

yesterday my boss did a oil pan in an Xterra. and when he was done and went to check the oil he went to pull the oil dipstick tube and it was stuck haha. The pan pinched the stick between the block. Had to tear the entire thing apart. You have to take out the front diff and everything to get the pan out of those things, whats funny I offered to do it for him, oh well... I have tons of stories, I see ---- ups every day

Today I was cutting rotors backwards with an on car lathe, haha. "Hey jeff why does that sound so funny" rofl..
HMT-Admin is offline  
Old 04-14-2004, 11:53 AM
  #19  
3.0 BAR
 
projekteg's Avatar
 
Join Date: Apr 2003
Posts: 11,058
Default Re:Mechanics Hall Of Shame...

Originally Posted by AbaZ
yesterday my boss did a oil pan in an Xterra. and when he was done and went to check the oil he went to pull the oil dipstick tube and it was stuck haha. The pan pinched the stick between the block.
dip sticks on xterra's suck! that ------- wire ----, i can never get mine back in, and you have to take the ------- skid plate off to get the filter(unless you want a big mess)
projekteg is offline  
Old 04-17-2004, 01:24 AM
  #20  
Banned
 
LSD Motorsports's Avatar
 
Join Date: Aug 2003
Posts: 2,898
Default Re:Mechanics Hall Of Shame...

Heres my hall of shame to remember... I was in a hurry to take a road trip in my crx.. was going on an hour drive or so. I start inspecting my car only to find out i have a ripped axle boot.
Solution:
The gum from my mouth to cover the rip.. I actually thought it would work
Haha
LSD Motorsports is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CivicOCD
General Discussion
7
03-10-2009 03:28 PM
OnYx
General Discussion
10
06-23-2004 02:41 PM
MR2Turbo
General Discussion
26
05-21-2004 10:19 PM
yayopwrcrx
General Discussion
13
02-03-2004 12:33 AM
mx524
General Discussion
18
09-04-2003 04:25 PM


Thread Tools
Search this Thread
Quick Reply: Mechanics Hall Of Shame...



All times are GMT -5. The time now is 07:08 AM.