identifying some srp pistons
07-30-2008, 11:54 PM
#1
0.5 BAR
Thread Starter
Join Date: Jun 2008
Posts: 80
identifying some srp pistons
met up with a guy to buy some CP pistons but they turned out to be srps. i ended up buying them cause they looked be be pretty good. and he threw in some eagle rods for a really good price.
suppose to be 81.5 bore. it clearly says srp up underneath it and it has 20 stamped on the opposite end of the srp im guessing thats bored 20 over stock??
suppose to be 81.5 bore. it clearly says srp up underneath it and it has 20 stamped on the opposite end of the srp im guessing thats bored 20 over stock??
07-31-2008, 01:32 AM
#6
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re: identifying some srp pistons
If the rings aren't binding, or wallowing up and down when you simulate a cyl wall pulling on them, those pistons are ****.
Also, when I saw you last month your hair wasn't that long, so this must be one of your untamed ginger pubes hanging off the right side of the skirt:
You might want to take care of that.
Also, when I saw you last month your hair wasn't that long, so this must be one of your untamed ginger pubes hanging off the right side of the skirt:
You might want to take care of that.
07-31-2008, 01:37 AM
#7
0.5 BAR
Thread Starter
Join Date: Jun 2008
Posts: 80
Re: identifying some srp pistons
guy told me he had cp pistons and eagle rods. we meet up and i see they are srps. told him i'd still buy em but they were connected to the rods and asked when hes gonna get them taken off. said he'd been selling them awhile and needed the cash fast cause hes going from turbo b16 to K swap. said hed take 200 for all em. i said SOLD!!!
to JD. nope no rings are binding at all, all oil and compression rings move freely 360 degrees. and no thats not a pube i let me hair grow cause i've been rocking a fohawk lately for the ladies...
to JD. nope no rings are binding at all, all oil and compression rings move freely 360 degrees. and no thats not a pube i let me hair grow cause i've been rocking a fohawk lately for the ladies...
07-31-2008, 01:40 AM
#8
0.5 BAR
Thread Starter
Join Date: Jun 2008
Posts: 80
Re: identifying some srp pistons
also to jd this shoulda been a pm but im lazy. i bought a manual boost controlelr on credit card. if i can get it hooked up fine ill rock this for awhile and get the ectune ebc setup later. with the new b16 tranny and my quaife lsd and those 14" DRs it dead hooks in 2nd gear and flyes. once i get the boost controller in and hooked up right ill come up lookin for some orange chicken and end up with 16psi muhahaha
07-31-2008, 01:46 AM
#9
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re: identifying some srp pistons
Don't worry about rotating the rings 360 degrees, worry about the ring wallowing up and down.
I am about to lay upon you some of the sweetest mspaint mojo you have ever seen, don't log off for the night or anything.
I am about to lay upon you some of the sweetest mspaint mojo you have ever seen, don't log off for the night or anything.
