How effective of an intercooler will this be (pics inside + random stuff)
#1
How effective of an intercooler will this be (pics inside + random stuff)
I got this for free from my dads work, Dont know what its for exactly but I thought I'd make it in to an intercooler.
Each one of the bars is .4 or .5 of a centemeterin diamiter, so lets say .4 X 24 = 9.6 = 96mm /25.4 = 3.7" so the combined area would be 3.7" of bars for the air to travel through.
The hole for the front mount, I still have to do body work on the car.
Interior taken out to get the car ready for work and painting
This side I have to grind out the rust and weld new metal in with holes for the clips.
This side was not bad, had a bit of surface rust, I grinded it down to bare metal primed it and used rubber coating on top, about 3 coats, the car will also be oil guarged after the paintjob, so nothing is going to rust on me anymore.
#8
Re: How effective of an intercooler will this be (pics inside + random stuff)
Originally Posted by random-strike
that could really cool my transmission!
#9
Re: How effective of an intercooler will this be (pics inside + random stuff)
Originally Posted by Xgenturbo
Originally Posted by random-strike
that could really cool my transmission!
#10
Re: How effective of an intercooler will this be (pics inside + random stuff)
Maybe if you modified it like such, cut all the little u-bends off to allow air to flow and then put some end tanks on it. Doubt the flow rate through it would be too great but if you need a cheapo one that bad would be super ghetto :P