absolutezroo

about how much hp will stock crx axels put up with? if need be...where can i get decent axles?

Ogubudiah

it depends on how you drive them, i honestly dont know how long as far as horsepower goes, but they should handle high 200's without just destroying, but like i said it really depends on how you drive them

X_Josh411_X

I think they are about the same axles as my 94 civic had. I had 230whp and they held great.

Bone1

forget the axles, the diff will let go first!!!!!!!!!!!

absolutezroo

yea..i was thinking about spending the money for lsd
or perhaps welding the diff? that would make for retarded turning though....

X_Josh411_X

you can find lsd for D series for like, 350 bucks, I see em on ebay every now and then. I had a JDM tranny, and came w/LSD when i bought it.

90dx

dont dump the clutch and watch for wheelhop.I dumped the clutch the other night a little to fast, caught some rough pavement and boom.I grenaded one axle and blew the diff out of the tranny in a matter of 2 seconds.The axles were almost brandnew [1500miles] and the tranny had 100,000 miles with no problems shifted really nice etc.I learned a good lesson about honda trannies.The car is a D16 with a T25 at 10-11psi so it has at best 200flywheel horse.

Foowee

Everyone always rates axels for power. Doesn't weight play a role too?

90dx

I would imagine weight would be a factor especially weight of rim/tire combo because that is what your turning.D16 diffs suck i just blew another since my above post.

Slo_crx1

Damn dude...didn't learn from the first one huh? Next time, get a lsd, and don't dump the clutch on it lol. Probably doesn't help too much either if you got some big honkin rims on it.