HMT Ontario Pics are up!!!!!!!!
05-15-2006, 09:34 PM
#1
3.0 BAR
Thread Starter
Join Date: Sep 2003
Posts: 3,751
HMT Ontario Pics are up!!!!!!!!
Well it was a LONG weekend for some but we got ---- done. Somethings had to be Ghetto Rigged(EK2000 chargepipes) but hey this was a HMT Meet!!!!
It start with AndrexXx showing up at my place at about 2
0 Friday, So we got to work, he needed his 450cc put on a a DP, no biggy, But I never expected DA engine bays to be that tight!!!
HMT Flange Template!
Classic Got to do it HMT Pic!!!!
We worked till about 110 Friday as guys showed up and then headed from the shop at my parents to my house about 2min drive away.
Next morning we finished of AndrexXx's car and got started on installing 2 kits on 2 cars. EK2000 Hatch, and 9tray turbo's coupe.
Turbo Compare, T3/T04B, IHI, T3/T04E
HMT Dinner Action and Cook!!!
The only Turbo car to show up, WOT's Buget Built a6 Rex. This thing sounded mean, Idled like ---- on a 3bar that we installed, but HUALED *** at 14-15psi!!! We even got pulled over at night while doing a tuning run, but it was for headlights and not topping out 3rd gear at 14psi thank god!!!
Some HMT Grill Trimming and intercooler hiding!!
The parking Lot. A few nice cars, a few beaters, and a project that I never have time to touch!!! Think the Slicks are big enough? Might have to find a better rim with a heavier backspace!!!
Turbo Kits installed and thing buttoned down!
All in all things went good. EK2000, Xgenturbo and 9tray turbo got about 1hr of sleep each and I was up from 80am Saturday till 80 Sunday night with not evenb a wink of sleep, but we got ---- done!! EK2000 made it home!! He had 8-10hrs of driving and only had a small oil line leak. I say that take ***** travelling that far on a fresh first timer turbo kit!!
6:00am Roll Call!!! My dad went out around 7:00 and bought us all coffee!!!
9tray turbo pulled nice @5psi then POOOF, something went, We thought it was a chargepipe, then the Audi WG as the diaphram was burnt to ----, but he drove it home with no boost almost 36hrs after he arrived. He tore it apart today (monday) and found that the Turbine wheel had shattered! But out comes a small Nissan TUrbo and in goes a T3/T4!! Go big or go home!!!
Thanks guys for coming out, we had a great weekend, and we found WOT cell phone!!!!
Lots of pics!!
It start with AndrexXx showing up at my place at about 2
0 Friday, So we got to work, he needed his 450cc put on a a DP, no biggy, But I never expected DA engine bays to be that tight!!!HMT Flange Template!
Classic Got to do it HMT Pic!!!!
We worked till about 11
0 Friday as guys showed up and then headed from the shop at my parents to my house about 2min drive away.Next morning we finished of AndrexXx's car and got started on installing 2 kits on 2 cars. EK2000 Hatch, and 9tray turbo's coupe.
Turbo Compare, T3/T04B, IHI, T3/T04E
HMT Dinner Action and Cook!!!
The only Turbo car to show up, WOT's Buget Built a6 Rex. This thing sounded mean, Idled like ---- on a 3bar that we installed, but HUALED *** at 14-15psi!!! We even got pulled over at night while doing a tuning run, but it was for headlights and not topping out 3rd gear at 14psi thank god!!!
Some HMT Grill Trimming and intercooler hiding!!
The parking Lot. A few nice cars, a few beaters, and a project that I never have time to touch!!! Think the Slicks are big enough? Might have to find a better rim with a heavier backspace!!!
Turbo Kits installed and thing buttoned down!
All in all things went good. EK2000, Xgenturbo and 9tray turbo got about 1hr of sleep each and I was up from 8
0am Saturday till 80 Sunday night with not evenb a wink of sleep, but we got ---- done!! EK2000 made it home!! He had 8-10hrs of driving and only had a small oil line leak. I say that take ***** travelling that far on a fresh first timer turbo kit!!6:00am Roll Call!!! My dad went out around 7:00 and bought us all coffee!!!
9tray turbo pulled nice @5psi then POOOF, something went, We thought it was a chargepipe, then the Audi WG as the diaphram was burnt to ----, but he drove it home with no boost almost 36hrs after he arrived. He tore it apart today (monday) and found that the Turbine wheel had shattered! But out comes a small Nissan TUrbo and in goes a T3/T4!! Go big or go home!!!
Thanks guys for coming out, we had a great weekend, and we found WOT cell phone!!!!
Lots of pics!!
. Other then that the si blue eg is the sex 
05-15-2006, 09:57 PM
#3
3.0 BAR
Thread Starter
Join Date: Sep 2003
Posts: 3,751
Re: HMT Ontario Pics are up!!!!!!!!
3lb Fibreglass hood, LIGHT!!!!!!!!
Body Kit on the silver EK, it's all up to opinion, some tell him (canuckhatch) to take it off, some say leave it.
Blue EG, Thanks, it mine for a year then my fiance gets it with a n/a LS/Vtec
Body Kit on the silver EK, it's all up to opinion, some tell him (canuckhatch) to take it off, some say leave it.
Blue EG, Thanks, it mine for a year then my fiance gets it with a n/a LS/Vtec
05-15-2006, 10:09 PM
#5
3.0 BAR
Thread Starter
Join Date: Sep 2003
Posts: 3,751
Re: HMT Ontario Pics are up!!!!!!!!
Ya, someone tried cleaning them with Acetone, some he had to paint them. That's why we got pulled over! Cop didn;t like them but WOT convince him they were stock!!!! Cop didn't even know the car was a Honda!! Got to love living out in the boonies!
05-15-2006, 10:11 PM
#7
3.0 BAR
Join Date: Jul 2004
Posts: 2,255
Re: HMT Ontario Pics are up!!!!!!!!
Wow, you guys got gregs car looking ------- sick
Awesome job on the frontmount trimmage Martin, never new you guys were actually gonna throw on the audi wastegate, ---- I bet that tok some time
About my hood, it was under 3.5lbs, vented right above the hood. BUT. On the way home (2hours in the rain on backroads) it went FWOOOOF right the ---- into my windshield, so Josh, if youre looking for a ef hood, its on the side of the ------- road with some carbon fiber hood pics haha. Car ran ------- nice and cool on the higway without a hood though like 140*, ---- happens, I'll pick up a stocker tomorrow I suppose to get my car back on the road and try and get some tuning smacked down
I cant beleieve you guys worked so late, I almost slept like a baby on the way home, grabbed some mickdicks to wake myself up
ps- you got osme nice *** people in town to pick up my phone on the side of the road and actually dleiver it to you, didyou know the guy?
Kevin
Awesome job on the frontmount trimmage Martin, never new you guys were actually gonna throw on the audi wastegate, ---- I bet that tok some time
About my hood, it was under 3.5lbs, vented right above the hood. BUT. On the way home (2hours in the rain on backroads) it went FWOOOOF right the ---- into my windshield, so Josh, if youre looking for a ef hood, its on the side of the ------- road with some carbon fiber hood pics haha. Car ran ------- nice and cool on the higway without a hood though like 140*, ---- happens, I'll pick up a stocker tomorrow I suppose to get my car back on the road and try and get some tuning smacked down
I cant beleieve you guys worked so late, I almost slept like a baby on the way home, grabbed some mickdicks to wake myself up
ps- you got osme nice *** people in town to pick up my phone on the side of the road and actually dleiver it to you, didyou know the guy?
Kevin
05-15-2006, 10:18 PM
#9
3.0 BAR
Thread Starter
Join Date: Sep 2003
Posts: 3,751
Re: HMT Ontario Pics are up!!!!!!!!
Na, dind't know the guy, he had to be about 20yrs old or so. They were walking home from a Dance in Exeter and saw it. It was on the very edge of Exeter. John said when you went to my house to get a case of beer you got out there to play with the MBC.
