Hit 12PSI !!!! RENR look out!!!!!
#1
Hit 12PSI !!!! RENR look out!!!!!
Well i am purposly raping the ---- out of my engine trying to hit 14psi so i can be as cool as RENR.... and it almost happend..
first of... my engine has either
* Blown head gasket
* Warped Head
* Cracked Head
Theirs a little bit of oil in the coolant... but no coolant in the oil....
well right now my ***** set at 11psi... and i cranked it up a bit... and ran it... well it made it up to 12 and was going for 13 but then i turned to look at the A/F ratio and it was in the middle of Stoich.... and then Bam,....... the CEL came on..... car bogged like hell and then i let my foot off the gas.... damn... i was almost there...
how much PSI can the stock MAP sensor take
first of... my engine has either
* Blown head gasket
* Warped Head
* Cracked Head
Theirs a little bit of oil in the coolant... but no coolant in the oil....
well right now my ***** set at 11psi... and i cranked it up a bit... and ran it... well it made it up to 12 and was going for 13 but then i turned to look at the A/F ratio and it was in the middle of Stoich.... and then Bam,....... the CEL came on..... car bogged like hell and then i let my foot off the gas.... damn... i was almost there...
how much PSI can the stock MAP sensor take
#4
Re:Hit 12PSI !!!! RENR look out!!!!!
well ill give u a secret, add a check valve to the vac line going to the map sensor or poke holes in it with a safety pin too bleed off some boost, then crank that bitch up some more!!oh and set your vafc at about -32 in the boost range and then maybe u can feel the 14 psi rush. hee hee.
you are planning to blow it up right?
you are planning to blow it up right?
#6
Re:Hit 12PSI !!!! RENR look out!!!!!
not really blow it up... just pretty much have fun with the ******.....
ive got a complete swap ready to go into it... plus a spare block in case something goes wrong... but theres a million mosquitos outside right now... so it looks like it wont be happening till tommorow afterwork... or sunday morning....
once the swap is complete.... im gonna start taking apart the old engine to get it ready for its rebuild...
ill take some pics...
ive got a complete swap ready to go into it... plus a spare block in case something goes wrong... but theres a million mosquitos outside right now... so it looks like it wont be happening till tommorow afterwork... or sunday morning....
once the swap is complete.... im gonna start taking apart the old engine to get it ready for its rebuild...
ill take some pics...
Thread
Thread Starter
Forum
Replies
Last Post
juli0_bustamante
General Discussion
13
11-26-2004 08:35 PM