Hey im Mike ,here's my build project
09-03-2007, 09:53 AM
#41
0.0 BAR
Join Date: Jul 2006
Posts: 0
Re: Hey im Mike ,here's my build project
Originally Posted by s1kciv
a nissan 240sx ?
they dont exsit as a JDM car , they only make a 180sx and 200sx in JDM RHD . (no bullshit)
try reading again. i said it was converted. why on earth would anyone import a piece of ---- 240 from sunshineland when there are 5409876 millions of them here already?
09-06-2007, 03:52 AM
#42
0.0 BAR
Thread Starter
Join Date: Aug 2007
Posts: 18
Re: Hey im Mike ,here's my build project
righto here is cold side cooler pipe i made yesterday .
i also welded on this rear engine mount (dont know how i'll replace it lol)
and what i'll do is make a U bracket to bolt onto motor and bolt through the engine mount , should work sweet .
here is hot side cooler pipe i used a hard heat resistant hose 2" it cam up really good , goes almost straight down to a stainless steel 90degree bend then into the silsicon bend to cooler .
i also welded on this rear engine mount (dont know how i'll replace it lol)
and what i'll do is make a U bracket to bolt onto motor and bolt through the engine mount , should work sweet .
here is hot side cooler pipe i used a hard heat resistant hose 2" it cam up really good , goes almost straight down to a stainless steel 90degree bend then into the silsicon bend to cooler .
10-24-2007, 05:57 AM
#45
1.0 BAR
Join Date: May 2007
Posts: 233
Re: Hey im Mike ,here's my build project
Awesome car and setup. by the way the turbo is a t3/to4e I have the same one on my b16. 
post up a vid of a rip when you get it finished! vids are a must when you get it done. Oh yea! are you positive that wastegate is 5psi? cause mine came with 8psi wastegate.
post up a vid of a rip when you get it finished! vids are a must when you get it done. Oh yea! are you positive that wastegate is 5psi? cause mine came with 8psi wastegate.
