Hey im Mike ,here's my build project
08-30-2007, 05:56 AM
#34
0.0 BAR
Thread Starter
Join Date: Aug 2007
Posts: 18
Re: Hey im Mike ,here's my build project
cheers guys!
well i been pretty slack latlely
got lots little things done
speedo drive, shiftlinkages i welded up tonight all work mint
got some hose for cooler
got me a hks sequental bov too , hopefully do cooler pipes this weekend
well i been pretty slack latlely
got lots little things done
speedo drive, shiftlinkages i welded up tonight all work mint
got some hose for cooler
got me a hks sequental bov too , hopefully do cooler pipes this weekend
08-30-2007, 02:22 PM
#36
0.0 BAR
Join Date: Jul 2006
Posts: 0
Re: Hey im Mike ,here's my build project
I ran a piece of ---- 240 down Fox hill rd once and did a triple take when he rolled the passenger side window down lol. I was stund for a sec cause the car was converted and yet couldnt get away from a basicly stock Single Cam. he was a total ricer too "Damn that things goes, what you got in there?" I didnt think he was serious. his ---- must have been broken.
08-30-2007, 02:32 PM
#37
1.5 BAR
Join Date: May 2007
Posts: 749
Re: Hey im Mike ,here's my build project
Originally Posted by 78NOVA
i also noticed its a rhd civic as well. was it converted or is it in fact a jdm civic? id still like to drive a rhd car for the hell of it and get some wierd looks going in my area.
O ya, and where the hell is the original Zealand?
08-31-2007, 09:24 PM
#38
0.0 BAR
Thread Starter
Join Date: Aug 2007
Posts: 18
Re: Hey im Mike ,here's my build project
Originally Posted by klyph
He's from New Zealand.
O ya, and where the hell is the original Zealand?
O ya, and where the hell is the original Zealand?
yup genuine JDM EF3 i got a JDM Si ZC crx (times 2) aswell
09-01-2007, 01:33 AM
#39
0.0 BAR
Thread Starter
Join Date: Aug 2007
Posts: 18
Re: Hey im Mike ,here's my build project
Originally Posted by 97EconoBox
I ran a piece of ---- 240 down Fox hill rd once and did a triple take when he rolled the passenger side window down lol. I was stund for a sec cause the car was converted and yet couldnt get away from a basicly stock Single Cam. he was a total ricer too "Damn that things goes, what you got in there?" I didnt think he was serious. his ---- must have been broken.
a nissan 240sx ?
they dont exsit as a JDM car , they only make a 180sx and 200sx in JDM RHD . (no bullshit)
09-03-2007, 05:50 AM
#40
0.0 BAR
Thread Starter
Join Date: Aug 2007
Posts: 18
Re: Hey im Mike ,here's my build project
done my bit for tonight got home at just after 5pm from work
i fitted intercooler on , made up 1 side of cooler piping all clamps on so hot side is completed ,
started on other side got half it done and marked where im gonna put my BOV , i'll take it to work tomo and weld it up , then piping should be done by thursday i gotta buy some bends too .
its mostly done things i have left to do are :
*heat wrap in places for precautions
*hook relay up for vtec to link
*weld / fit cooler pipe + BOV
*heat shield for radiator bit close to dump pipe .
*cut / reweld/join my exhaust, my dump pipe pulled it to one side a bit.
*fit a slimline radiator fan + run temp switch wire to link
*fit bonnet/bumper on
*dyno tune
i dunno if i have to hook TPS up didnt have have to before with ZC turbo but it might be needed with vtec and throttle positing maybe ?
i fitted intercooler on , made up 1 side of cooler piping all clamps on so hot side is completed ,
started on other side got half it done and marked where im gonna put my BOV , i'll take it to work tomo and weld it up , then piping should be done by thursday i gotta buy some bends too .
its mostly done things i have left to do are :
*heat wrap in places for precautions
*hook relay up for vtec to link
*weld / fit cooler pipe + BOV
*heat shield for radiator bit close to dump pipe .
*cut / reweld/join my exhaust, my dump pipe pulled it to one side a bit.
*fit a slimline radiator fan + run temp switch wire to link
*fit bonnet/bumper on
*dyno tune
i dunno if i have to hook TPS up didnt have have to before with ZC turbo but it might be needed with vtec and throttle positing maybe ?
