Help a brother out
#21
Re: Help a brother out
Originally Posted by lilpooh21186
if xeno chipped your board mostlikly he took it out already but double check it its j12 small resistor on the left side of your ecu holding the plugs away from you
Thanks
That is something I should have already known
Originally Posted by lilpooh21186
http://www.-------------/install/Xenocron-ECUs.htm there is the link pix didnt work
#22
Re: Help a brother out
yeah, j12 has been removed, freelog is showing a/f ratio inversely of actual....for instance, a/f is at 15 with moates, its at 13 with freelog; if a/f is at 17 with moates, it drops to 12 w/freelog....sanity check is now saying it found crome data, but not the loop check, it fails....
i don't know, i'm confused, need to read up on some more stuff...thanks for the help
i don't know, i'm confused, need to read up on some more stuff...thanks for the help
#24
Re: Help a brother out
Ground the wideband at the thermostat housing, your ground offset will be minimal and it won't change with load.
I have no idea what this loopback stuff is. You are running the ECU with something that has datalogging enabled, right? Because you can't log a stock ECU, or (with Crome) one that doesn't have datalogging code added in.
I have no idea what this loopback stuff is. You are running the ECU with something that has datalogging enabled, right? Because you can't log a stock ECU, or (with Crome) one that doesn't have datalogging code added in.
Thread
Thread Starter
Forum
Replies
Last Post
86 fiero
Forced Induction
15
09-23-2008 12:44 AM
drunkinmaster1
General Discussion
9
01-02-2007 09:53 AM