Oscar

Well, decided i couldn't wait anymore, so I went and bought a new WRT54G.

Now, how do I go about setting it up?

Oscar

ok, I'm using this how to right here
http://forums.anandtech.com/messagev...VIEWTMP=Linear

my problem is, I can't get into the ------- router setup thing.

For my dsl modem, it's 192.168.0.1, and I know that for linksys its 192.168.1.1, but it doesn't let me go in. i don't know wtf is wrong.

J-SMITH69

most wireless crap name is 54mbits and typical lan wired cat5 etc connection will be 100mbits. unless you have gig hardware in which it would be 1000mbits

Oscar

ok, finally got into the admin section.

Now, when I upgrade the firmware, it says "upgrade are fail".

anyone care to explain?

J-SMITH69

ahahah upgrade are fail nice

Oscar

Yea, I know. It's ------- retarded.

I had to read it twice to make sure I was reading it correctly.

Jorsher

go to dd-wrt.com and download and install the correct firmware for your model router.

Did you connect your computer to the router with a ethernet cable? You can upgrade the firmware with wireless but if something happens you run the risk of bricking the router, and it'll need to be connected via ethernet anyway.

Make sure you have the right firmware from dd-wrt.com and hopefully "upgrade are succeed"

Oscar

Think you can find the link for me? I went here http://dd-wrt.com/dd-wrtv2/downloads.php and got lost.

I don't know which is the correct firmware for mine, as it doesn't really specify.

And yes, I connected my router to the computer

Jorsher

http://www.dd-wrt.com/dd-wrtv2/down....d-wrt.v23+SP2/

Probably the same one you have, but try that. Guess it's the same software for all routers.

Oscar

This is what happens after I click browse, find the file, then hit upgrade


If i click continue, it looks as if its upgrading, but a few minutes later another pop up comes up saying "upgrade are failed"