General Discussion Off-Topic Discussion and Enlightenment

Debuting my G2 Integra *dyno sheet & vids*

Thread Tools
 
Search this Thread
 
Old 05-09-2005, 02:05 PM
  #1  
0.5 BAR
Thread Starter
 
DAVe's Avatar
 
Join Date: Oct 2004
Posts: 197
Default Debuting my G2 Integra *dyno sheet & vids*

So... i haven't officially announced it on the forum, but my car is finally up & running!!
I've had it now for a little over a month. It's running slightly rich & making 265 whp w/ 170 ft/lbs @ 10 psi. Once I upgrade my ignition, i'm planning on raising the boost & running a little more of an aggressive tune.

Here's the sheet:


Here's some recent footage:

GS-R turbo VS Neon SRT-4
Run #1: He gets the jump on me with 1 long honk followed by 2 short honks. I catch his *** at the top of 5th.
Run #2: This time it's a fair launch...... check the vid to see what happens

GS-R turbo VS EF Hatch with LS swap
This hatch is very quick... he made me race him from a dead stop..... since my car has the traction of a snowboard, he whips my *** off the line. I eventually catch him and pass him. He made me race 4 times. He told me that it was "just a stock engine"... He didn't let me look under the hood either.

GS-R turbo VS 350z Supercharged
I have to say I was very impressed with my car against the 350z. I was planning on him outright destroying me from start to finish. I knew I was going to lose, but i didn't make it to easy for him. I felt he only crept by me instead of blowing my doors off! I talked to him afterwards. He's running a vortec supercharger at 11.5 psi making 420 HP! He was definitely impressed with my car.

..... more vids & updates to come!
DAVe is offline  
Old 05-09-2005, 02:15 PM
  #2  
3.0 BAR
 
AgentMurdoc's Avatar
 
Join Date: Dec 2002
Posts: 9,203
Default Re: Debuting my G2 Integra *dyno sheet & vids*

like a fireball dude!

nice vids... my fav was the srt4, cause his *** got pwn3d the second time around. ------ beeeeeeeeeep beep beep... sheit, good work
AgentMurdoc is offline  
Old 05-09-2005, 02:15 PM
  #3  
3.0 BAR
 
Donald125's Avatar
 
Join Date: May 2003
Posts: 6,279
Default Re: Debuting my G2 Integra *dyno sheet & vids*

did u meant debugging? :P

what`s your setup, why are you getting only 265/169 @ 10 psi.
Donald125 is offline  
Old 05-09-2005, 02:27 PM
  #4  
0.5 BAR
Thread Starter
 
DAVe's Avatar
 
Join Date: Oct 2004
Posts: 197
Default Re: Debuting my G2 Integra *dyno sheet & vids*

Originally Posted by Donald125
did u meant debugging? :P

what`s your setup, why are you getting only 265/169 @ 10 psi.
like i said.... i have it tuned rich. I'm not to worried about getting bigger #'s until i upgrade my ignition. Plus, i had an exhaust leak when it was dynoed. It runs much better now with the leak fixed. It is getting dynoed again on Saturday.

setup:

Fully Built B17A1 block. (not re-sleeved)
balanced crank
Crower Billet Rods
Wiseco oversized Pistons 9.0:1 Compression
Race Engineering Block Guard

Cometic High Boost Head Gasket

Almost Fully Built GS-R Head
Crower dual valve springs
Crower Titanium Retainers
Ferrea Titanium Valves
Stock GS-R Cams
AEM Adjustable Cam Gears
RC 370 cc fuel injectors

Turbonetics T3/T4 Turbo

Engine Management:
P61 ECU
Apex-i V-AFC
Apex-i AVC-R
Vortec FMU
Blox missing link

Apex-i Turbo Timer
Walbro 255 L/hr Fuel Pump

Intake:
Custom Intercooler piping (matches diameter of stock throttle body)
Greddy Type S Blow-off Valve
Spearco Front Mount Intercooler

Exhaust:
OBX Tubular Exhaust Manifold
Turbonetics Deltagate Wastegate
Custom 2.5" downpipe
Custom 2.5" straight Pipe
Greddy 66mm Street Exhaust
DAVe is offline  
Old 05-09-2005, 02:52 PM
  #5  
0.0 BAR
 
rota92's Avatar
 
Join Date: Jul 2003
Posts: 47
Default Re: Debuting my G2 Integra *dyno sheet & vids*

Engine Management:
P61 ECU
Apex-i V-AFC
Apex-i AVC-R
Vortec FMU
Blox missing link



Umm....Get rid of the FMU like before your car was running?
rota92 is offline  
Old 05-09-2005, 02:53 PM
  #6  
3.0 BAR
 
Donald125's Avatar
 
Join Date: May 2003
Posts: 6,279
Default Re: Debuting my G2 Integra *dyno sheet & vids*

missing link and vafc don`t mix
Donald125 is offline  
Old 05-09-2005, 02:55 PM
  #7  
0.5 BAR
Thread Starter
 
DAVe's Avatar
 
Join Date: Oct 2004
Posts: 197
Default Re: Debuting my G2 Integra *dyno sheet & vids*

everything seems to be working just fine.

i'm sorry you guys don't like my car.
DAVe is offline  
Old 05-09-2005, 03:00 PM
  #8  
3.0 BAR
 
Donald125's Avatar
 
Join Date: May 2003
Posts: 6,279
Default Re: Debuting my G2 Integra *dyno sheet & vids*

LOL noone hates your car it`s just that there`s problem with it but thumps up if it`s wokring fine for you
Donald125 is offline  
Old 05-09-2005, 03:11 PM
  #9  
0.0 BAR
 
R-MAK's Avatar
 
Join Date: Feb 2003
Posts: 0
Default Re: Debuting my G2 Integra *dyno sheet & vids*

nice vids, atleast you rape on your turbo gsr unlike a certain other member
R-MAK is offline  
Old 05-09-2005, 03:14 PM
  #10  
3.0 BAR
 
Chris Harris's Avatar
 
Join Date: Jul 2003
Posts: 6,449
Default Re: Debuting my G2 Integra *dyno sheet & vids*

Doesnt seem too much like a HOME MADE TURBO setup to me but whatever floats your boat. You did however pick the best chasis known to man (IMHO).
Chris Harris is offline  


Quick Reply: Debuting my G2 Integra *dyno sheet & vids*



All times are GMT -5. The time now is 07:04 AM.