David Lee (Dyno Results B16a HMT) Leed
#1
David Lee (Dyno Results B16a HMT) Leed
Dave brang his car down from bellingham today to dyno tune it at a local race shop.
Did pretty well
91 Crx SI
You can see his custom Tbird intercoolers welded together
Stock B16a w/ Ys1 Trans, custom HMT kit (dave can list all the details)
Running 8psi on the Dyno
Ended up making 237.5hp & 166.6tq
Nice Work...
Jeff Frank
Did pretty well
91 Crx SI
You can see his custom Tbird intercoolers welded together
Stock B16a w/ Ys1 Trans, custom HMT kit (dave can list all the details)
Running 8psi on the Dyno
Ended up making 237.5hp & 166.6tq
Nice Work...
Jeff Frank
#4
Re:David Lee (Dyno Results B16a HMT) Leed
What a fun day
Moved vtec back up to 5400 and got rid of the dip. Kinda felt like I wasted everyones time due to my jacking off with my homemade boost controller. All runs made started at 4psi @ around 3500 and crept to 8 by 7500, didnt get it right till the drive home , next time
(note to self: get your ---- running right before you show up)
Was nice to finaly see my A/F and make some small adjustments. Feel lots better when raping it now...hehehe.
I came in wanting at least 230, so I'm satisfied, (but I really wanted more)
Thanks Jeff for meeting up w/ me and helping out!
Heres a short vid, sorry bout' the sound, my camera blows goats on the side.
http://www.we-todd-did-racing.com/we...MxeTU0MQ%3D%3D
Right click save-as.
Moved vtec back up to 5400 and got rid of the dip. Kinda felt like I wasted everyones time due to my jacking off with my homemade boost controller. All runs made started at 4psi @ around 3500 and crept to 8 by 7500, didnt get it right till the drive home , next time
(note to self: get your ---- running right before you show up)
Was nice to finaly see my A/F and make some small adjustments. Feel lots better when raping it now...hehehe.
I came in wanting at least 230, so I'm satisfied, (but I really wanted more)
Thanks Jeff for meeting up w/ me and helping out!
Heres a short vid, sorry bout' the sound, my camera blows goats on the side.
http://www.we-todd-did-racing.com/we...MxeTU0MQ%3D%3D
Right click save-as.
#7
Re:David Lee (Dyno Results B16a HMT) Leed
Internaly stock.
The list is:
-T3 .60/.48 from a Thuderbird auto.
-Two Thunderbird IC's welded together with relocated inlets/outles
-DSM 450's
-2.5 DP to 3" all the way.
-Deltagate
-Hondata 2b
Lots of fabricating credit goes to my brother. He likes to make ----.
I redid the vid post so it will play better. (lower bit-rate)
The list is:
-T3 .60/.48 from a Thuderbird auto.
-Two Thunderbird IC's welded together with relocated inlets/outles
-DSM 450's
-2.5 DP to 3" all the way.
-Deltagate
-Hondata 2b
Lots of fabricating credit goes to my brother. He likes to make ----.
I redid the vid post so it will play better. (lower bit-rate)
Thread
Thread Starter
Forum
Replies
Last Post
lurker
Forced Induction
24
10-31-2005 11:09 AM