compression tester stuck in head
#1
compression tester stuck in head
like the title says, this is so stupid. The hose just keeps twisting and twisting. I tried starting it on 3 cylinders hoping it would heat the head enough to expand the spark plug hole and let it go, didn't work. What should I do? :1
#2
Re: compression tester stuck in head
man that sux, that happened to us on my friends b16 but it wasn't spinning at all, the rubber kept wrinkling n twisting but not rotating. i dunno how they got it out tho cuz i left after an hour of trying. good luck
#7
Re: compression tester stuck in head
http://buy1.snapon.com/catalog/item....re&dir=catalog
Get one of these for next time. I've got one on order from my dealer. As far as getting yours out, did you try filling the hole with some PB blaster or something? It may help.
Get one of these for next time. I've got one on order from my dealer. As far as getting yours out, did you try filling the hole with some PB blaster or something? It may help.
#8
Guest
Posts: n/a
Re: compression tester stuck in head
so the hose is still attached right....pull until the bitch breaks, then take a thin wall 19mm (i think) and get the tester out. you might have to grind down the outside of the socket. i did a similar thing: left the extension on the end of the tester, which got stuck down there
#9
Re: compression tester stuck in head
Originally Posted by nitrofish420
#10
Re: compression tester stuck in head
Originally Posted by ghettoturbo
so the hose is still attached right....pull until the bitch breaks, then take a thin wall 19mm (i think) and get the tester out. you might have to grind down the outside of the socket.