Donald125

I am not sure if anyone remember i was having problem connecting two routers a while ago, now i have it all setup and works good but i have another question.
On the Client list of the primary router there are only ONE computer showing up (one IP which is me), but here should be a total of 3 ip on the list. Two of the computers are connected directly to the main router with their individual LAN and three other computer connected to a hub that is connected to one of the LAN.

could a firewall or something similar cause them not to show??

kain

dude, i dont know how you can screw this up.it should be connected like this.

all computer > hub > 1 port on router.

its that simple. the routers job is simply to link them togeather. werather you can see other computers isnt a router problem, but a windows/ other bullshit problem besides router.

boosted m3

thats the easiest way but you could also configure both those routers to use rip version2 routing so the recognize each other and then proceed to use the same subnet and manually enter the route number in each router so they can talk to each other, ha but hub or switch into router will work perfectly, but if you have a firewall and need ur comps to talk to each other you will have to allow a range of addresses so they can talk.