Any 87-93' 5.0 HMT guys ??
10-13-2004, 04:24 AM
#31
1.5 BAR
Join Date: Jun 2003
Posts: 824
Re:Any 87-93' 5.0 HMT guys ??
10-13-2004, 06:05 AM
#32
1.5 BAR
Thread Starter
Join Date: Jan 2003
Posts: 1,115
Re:Any 87-93' 5.0 HMT guys ??
Originally Posted by FURACERMAN
30psi on the stock block huh....
3 volvo ICs huh....
cummings tD turbo huh....
low 12's on 22 psi huh...
maybe I'll look into SVOs again, hehe...
10-13-2004, 07:39 AM
#33
0.0 BAR
Join Date: Apr 2004
Posts: 0
Re:Any 87-93' 5.0 HMT guys ??
as said before, the bottom ends are bullet proof, and thats not used a figure of speech. 300hp can be saught out on the stock internals.
you can easily throw 20psi on the stock motor. just upgrade the turbo and put an intercooler on it. redo the fuel management.
I know my uncle put one in a sprint car a long time ago and was running around 400hp on nitro methane.
you can easily throw 20psi on the stock motor. just upgrade the turbo and put an intercooler on it. redo the fuel management.
I know my uncle put one in a sprint car a long time ago and was running around 400hp on nitro methane.
10-13-2004, 11:09 AM
#34
0.5 BAR
Join Date: Aug 2004
Posts: 67
Re:Any 87-93' 5.0 HMT guys ??
A friend of mine is in the process of running 2 T3 Turbos from the 85-86 Thunderbird Turbocoupes on his 93 Stang LX 5.0. I also have a friend who has an 87 Turbocoupe. The turbocoupe moves right along, hes bumped the boost up and its a strong running car.
10-13-2004, 11:14 AM
#35
0.0 BAR
Join Date: Apr 2004
Posts: 0
Re:Any 87-93' 5.0 HMT guys ??
Originally Posted by MNCRXSi
A friend of mine is in the process of running 2 T3 Turbos from the 85-86 Thunderbird Turbocoupes on his 93 Stang LX 5.0. I also have a friend who has an 87 Turbocoupe. The turbocoupe moves right along, hes bumped the boost up and its a strong running car.
10-13-2004, 11:23 AM
#36
1.5 BAR
Join Date: Jun 2003
Posts: 714
Re:Any 87-93' 5.0 HMT guys ??
Originally Posted by sccaeg
as said before, the bottom ends are bullet proof, and thats not used a figure of speech. 300hp can be saught out on the stock internals.
you can easily throw 20psi on the stock motor. just upgrade the turbo and put an intercooler on it. redo the fuel management.
I know my uncle put one in a sprint car a long time ago and was running around 400hp on nitro methane.
you can easily throw 20psi on the stock motor. just upgrade the turbo and put an intercooler on it. redo the fuel management.
I know my uncle put one in a sprint car a long time ago and was running around 400hp on nitro methane.
10-13-2004, 11:35 AM
#37
3.0 BAR
Join Date: Aug 2004
Posts: 2,028
Re:Any 87-93' 5.0 HMT guys ??
'89 LX Hatchback...a testiment to the durability of the fox body mustang....over 300k miles on the body with a new engine, transmission, and rear end. It's N/A for now...but if it ends up not selling I might buy it off my brother and then the forced induction comes. 13.9 on street tires and 4.10 rear end...I think. (not the ones pictured)
It's for sale by the way
10-13-2004, 01:04 PM
#38
1.5 BAR
Thread Starter
Join Date: Jan 2003
Posts: 1,115
Re:Any 87-93' 5.0 HMT guys ??
Now that I'm thinking a little clearer after a 6 hour nap...
low 12s isn't really that great for all that is done the that car.....
ported/gutted/knife edged intake
ported head
very large turbo ( large enough to dwarf the SVO 60-trim )
3'' DP and exhuast
900cfm intercooler
non-A/C, roll-up window, LX 4cylinder COUPLE !! Light as it gets.
larger remapped maf/vine sensor
upgraded throttle body
MT slicks !!!
2-step rev limiter
aftermarket turbo manifold
And lets not forget its pretty big I-4..
The stock blocked/head/intake D16Z6 has run 11.8 with FWD
This car is almost equally ghetto, but runs mid 10's. http://www.turbostangman.stangnet.com/
low 12s isn't really that great for all that is done the that car.....
ported/gutted/knife edged intake
ported head
very large turbo ( large enough to dwarf the SVO 60-trim )
3'' DP and exhuast
900cfm intercooler
non-A/C, roll-up window, LX 4cylinder COUPLE !! Light as it gets.
larger remapped maf/vine sensor
upgraded throttle body
MT slicks !!!
2-step rev limiter
aftermarket turbo manifold
And lets not forget its pretty big I-4..
The stock blocked/head/intake D16Z6 has run 11.8 with FWD
This car is almost equally ghetto, but runs mid 10's. http://www.turbostangman.stangnet.com/
10-13-2004, 01:38 PM
#39
3.0 BAR
Join Date: Jan 2003
Posts: 4,438
Re:Any 87-93' 5.0 HMT guys ??
Yeah the older stangs seem to be much much tougher... ive seen countless newer stangs breaking tranny/rearends and driveline parts in general... But damn forced induction stangs can be some very fast/scary shizz...
http://www.tysonracing.com/786.MOV
http://www.tysonracing.com/bradhighlight.wmv
watch those vids...
http://www.tysonracing.com/786.MOV
http://www.tysonracing.com/bradhighlight.wmv
watch those vids...
10-13-2004, 02:39 PM
#40
0.5 BAR
Join Date: Aug 2004
Posts: 67
Re:Any 87-93' 5.0 HMT guys ??
Originally Posted by sccaeg
Originally Posted by MNCRXSi
A friend of mine is in the process of running 2 T3 Turbos from the 85-86 Thunderbird Turbocoupes on his 93 Stang LX 5.0. I also have a friend who has an 87 Turbocoupe. The turbocoupe moves right along, hes bumped the boost up and its a strong running car.
I agree, but I don't have pictures of either car, the 93 Mustang is a really nice Candy Apple Red, I guess it was a limited color for 93 only. He also has some newer cobra rims on it.
