Turbo 400cc motorcycle Carbed
#1
Turbo 400cc motorcycle Carbed
Ok guys here is the planned setup. I have an IHI RHB32 turbo with a 7psi wasegate on it that will be going on a 400cc twin motorcycle motor. The question i have is the carburator set up. I realize that i need to increase the fuel but i have no experience with boosting carb motors. The carbs will be mounted to the intake side of the turbo. I looked for info on this but i cant find ----. about how many jet sizes will i have to go up on every jet to make this run well and not explode. Oh yeah this is going on an ice cart running a cirlce track so WOT all day adn its cold as ---- when running. Thanx for any help
#3
Re:Turbo 400cc motorcycle Carbed
Oh yeah i forgot about google i spent 4 hours on msn and altavista just today. And i was thinking about just one carb i was looking at them on ebay but i didn't know which size. I was thinking that if the motor is a 400 and i'll be running7 psi then a carb for a 500cc motor would work well...
#5
Re:Turbo 400cc motorcycle Carbed
Ok so i went to turbo calculator and entered my ---- 400 cc motor at 7 psi is roughly 80cfm at 9000 rpm. Then i entered a 600 cc motor with no boost and this came upe to be nearly the same value.
What do u think about a carb from a 600 cc motor Should work well atleast in my mind
What do u think about a carb from a 600 cc motor Should work well atleast in my mind
#6
Hi guys, i have this duke 390, which i wanted to turbocharge, i know its a lil stressed 375 cc single cylinder motor but is it possible to turbo it ?
if yes was would be the required parts for it ??
also can it be supercharged instead of tubocharging it ??
if yes was would be the required parts for it ??
also can it be supercharged instead of tubocharging it ??
Thread
Thread Starter
Forum
Replies
Last Post
Turbodelsolman
General Discussion
6
02-23-2003 08:10 PM