2.8 mk3 vr6 turbo/holset?
#1
2.8 mk3 vr6 turbo/holset?
hi all new member , im about to change/modify my currant turbo which is a to4b .84 t4 turbo which has run 18psi daily without a issuise , but i want more boost and slightly lower down spool, so i plan to use a holset hx35 t3/twinscroll 12cm houseing,76mm straight thow pipe,with a homemade twinscroll manifold ,
but first i have a holset 12blade /8blade hx35 ,which will run 20/25psi daily
is there any in spool/boost differnce by changeing the cold side to a 7blade hx40 with keeping the oringal 12blade 12cm turbine and exhaust houseing, as the hx35 to the hx40 has one blade less?and are angled differnert fins?
but first i have a holset 12blade /8blade hx35 ,which will run 20/25psi daily
is there any in spool/boost differnce by changeing the cold side to a 7blade hx40 with keeping the oringal 12blade 12cm turbine and exhaust houseing, as the hx35 to the hx40 has one blade less?and are angled differnert fins?
Thread
Thread Starter
Forum
Replies
Last Post
green91
Forced Induction
1
05-28-2008 10:48 PM