1990 Legacy build
01-20-2009, 05:55 AM
#31
1.0 BAR
Join Date: Nov 2004
Posts: 204
01-20-2009, 05:42 PM
#32
0.0 BAR
Join Date: Apr 2006
Posts: 0
01-20-2009, 10:10 PM
#34
0.5 BAR
Join Date: Jul 2006
Posts: 102
Re: 1990 Legacy build
what are you using to tune right now? piggy back, afc hack, fmu. or some other kind of mass airflow tuner?
I'd like to know because I have a 93 legacy ss that I was running 16lbs of boost off of the stock turbo through a wrx intercooler. All I had was an msd dis 2 pulling timing.
01-20-2009, 11:02 PM
#35
1.0 BAR
Thread Starter
Join Date: Dec 2005
Posts: 397
Re: 1990 Legacy build
Originally Posted by fearsomedan
what are you using to tune right now? piggy back, afc hack, fmu. or some other kind of mass airflow tuner?
I'd like to know because I have a 93 legacy ss that I was running 16lbs of boost off of the stock turbo through a wrx intercooler. All I had was an msd dis 2 pulling timing.
02-01-2009, 02:06 PM
#40
1.0 BAR
Thread Starter
Join Date: Dec 2005
Posts: 397
Re: 1990 Legacy build
Some of the stuff I already had, some I took off of the reddevil, but IF I had to replace it, this is what I would probably pay.
NA block, $150?
Mahle pistons $450 (although I only paid $28 via a raffle!!!!!)
STI rods and crank $150
Bearings $100
FMIC kit came with stainless piping, couplers and BOV $225
Clutch kit $200
Ebay turbo $<200
Oil feed line $35
550cc injectors (free, modded my stock NA ones)
twin turbo heads $250-400
intake manifold (NA) $50
down pipe back Exhaust $150
Up and down pipe $20 materials
Heat wrap $40
Modded MAF $80 (free to me, I am the one that sells them
)
Air filter $50
Greddy Trust MBC $50 (used off ebay)
Gauges $50 (Boost and AFR narrowband)
Misc $150
Perfect Power 6 piggy back $250
Borla Header $250
So at least $3000....
Damn, I DO NOT LIKE adding this ---- up!
NA block, $150?
Mahle pistons $450 (although I only paid $28 via a raffle!!!!!)
STI rods and crank $150
Bearings $100
FMIC kit came with stainless piping, couplers and BOV $225
Clutch kit $200
Ebay turbo $<200
Oil feed line $35
550cc injectors (free, modded my stock NA ones)
twin turbo heads $250-400
intake manifold (NA) $50
down pipe back Exhaust $150
Up and down pipe $20 materials
Heat wrap $40
Modded MAF $80 (free to me, I am the one that sells them
)Air filter $50
Greddy Trust MBC $50 (used off ebay)
Gauges $50 (Boost and AFR narrowband)
Misc $150
Perfect Power 6 piggy back $250
Borla Header $250
So at least $3000....
Damn, I DO NOT LIKE adding this ---- up!
