Hi all,
Great to be a sponsor again.
I specialize in lowcost Wideband Controllers.
JAW 1.03 DIY KIT:
JAW
-$45 DIY Kit: Without Display
-$70 DIY Kit: With Display
-$80 Assembled: Without Display
-$115 Assembled: With Display
-Uses the inexpensive Bosch LSU Wideband Sensor.
-Accuracy to 0.01 Lambda.
-2 programmable outputs
-Free Air Calibration
-Real-time datalogging
-User selectable refresh rate of 8-255 [hz] for digital display
-Reads from 0.69 [Lambda] to 2.33 [Lambda]
-Reads from 10.18 [AFR] - 34.28 [AFR]
JAW 1.041 DIY Kit:
New Page 1
-$37.50 for PCB and preprogrammed microcontroller
-$17.50 for Display PCB
-Uses the inexpensive Bosch LSU Wideband Sensor.
-Accuracy to 0.01 Lambda
-1 programmable 0-5v output channel
-1 programmable 0-1v simulated narrowband output
-Free Air Calibration
-Reads from 0.69 [Lambda] to 2.33 [Lambda]
-Reads from 10.18 [AFR] - 34.28 [AFR]
-Built in RPM pickup
-Three 5mm LEDs on board to show power and sensor temp
-EGT reader and display
-Boost display
NAW_OEM:
New Page 1
-Lowest priced assmebled wideband controller in the world @ $50 USD
-Smallest wideband controller in the world, 1.358" x 0.9"
-99% assembled
-0.01 Lambda accuracy over 10 to 19 AFR
-Supports 7 LED display of AFR/Lambda
-Supports dual LED display of LSU temperature
-0-5v Linear Voltage Output; 9-19 AFR, 0.612-1.293 Lam
-Simulated Narrowband output
-Digital PID temperature controller
-Digital PID pump cell controller
-Over voltage and reverse voltage protected
-Onboard self resetting thermal fuse for over current protection
-60 day money back guarantee
Regards,
Alan To
Low Cost Wideband Controllers for your Tuning Needs
Low Cost Wideband Controllers for your Tuning Needs 
